Anyone out there have it? There was a version that allowed graphics to be placed on the cards. Anybody? Thanks! The free versions are for NSM and I'm not sure if they will line up on the Rowe perforated title 4 card sheets?

The batteries are dead in the memory unit. There are 3 of them packaged together. What size are they?

it's me

I recently purchased a ROWE AMI CD 100-C jukebox. All was working perfectly until I attempted to remove 70% of the CDs. Now, when I turn the machine back on, I have no power on the display panel, and no control over the buttons or page turner.

hi I wanted to inform you that the problem has been solved on error 05-63 01 Then selecting the cd number did not start the basket, but the cd started spinning incorrectly, the board error light on the central ccc and the central mechanism control cd came on. Checking with the keyboard and entering...

Lost sound in left channel of jukebox. When machine is in non-playing mode I hear hissing coming from the speakers. When a song is selected, the hissing seems to stop but get no sound. Right side plays OK. When I cut power to the unit I hear a loud "pop" through the speakers. I believe the problem...

Hi When I select a B side, the chosen song gets selected but also the next one numerically. This seems particularly bad in the mid section and happens half of the time? Any clues? Thanks for reading

I bought a 478 a month ago that works great, but the Hit Tracker is dead. Each of the song-tracking 4 displays have a burn-out point on the board, leading me to believe - the root cause is the power supply. I have the service manual but it does seem to have voltage test- points. Is there a...

You proberly could make a ribbon cable find the right size wire., stretch them between two dowels ,so they come out straight. Then make a jig. Epoxy them on the flat . Color Code the wires if nessasary. Experiment to find the best method etc

My Rowe 83 gripper arm sits too low an crashes into carousel. Are the gears worn ,the stop ,etc. Everything else seems to be fine. Any help or parts welcomed

The issue: The 444 jukebox activates selections A1 through G1 correctly. But H1 through K1 activates the write-in but will not play; All selections above K, write-in keeps spinning without making a selection. This selection trouble occurs for sections 2 through 8 as well.

Rock Ola 7000 SX. scans when you power up, scans twice but does't stop at home position, but it does hesitate then starts playing all cd's #1 on up

Trying to figure out the speaker wiring for the left and right up on the terminal strip. I have 1 red, 1 purple and only 1 black up there. Someone wrote in pencil that for the left channel purple to E7, black to E4 and red to E1. For the right channel red to E4 and black to E1. Any ideas? Thanks!

45's only. Has no 33 1/3 auto speed unit. Putting directional speakers on it. I eliminated the auto speed directional speakers square plug but kept the rectangular speaker plug that plugs in the upper left side of the amp. Center wire on the plug is ground. outer top and bottom wires are left and...

Hi I have a Rowe Ami CD 100 which stopped working, it all lights up. I had a friend look at it, there’s no error codes he’s tested everything and it seems ok Any suggestions I can make a selection of the cd I want but then nothing. I would dearly love to get this sorted as it’s my music for around...