|
|
NSM hit 120 jukebox by
Sode
Hey
I have a NSM hit 120 jukebox. But when it is finish playing a record it
will scan and scan and scan until you press some numbers. Do you know
what could be wrong?
thanx
Thomas from Denmark
|
April 18th 06 03:24 PM
by Sode
|
0 |
783 |
|
|
FS: Nice original Wurlitzer 1015 at Coinopwarehouse by
Coinopwarehouse
Complete with coin, Jacobs tonearm, nice cabinet, needs plastics, easy
machine to restore or just fluff and puff. Machine has been sitting in
a home for many years. $5700. Email if
interested.
|
|
1 |
816 |
|
|
|
April 18th 06 03:32 AM
by todfun
|
0 |
529 |
|
|
OT FS in MA: Circa 1970 Dennis Pop Corn Warming Machine by
[email protected]
Circa 1970 Dennis Pop Corn Warming Machine. Top half separates from
bottom half (to be used as counter top model), top half is in good
condition. Model DEC-2. Its made of stainless steel, so it's not too
rusty (although there are a few spots), a little polish and it should
clean up pretty well....
|
|
0 |
581 |
|
|
FS in MA: 1970 Wurlitzer 3400 Statesman by
[email protected]
1970 Wurlitzer 3400 "Statesman" Jukebox. Fair Shape, Could not try it,
I assume it does not work. looks complete except for two missing
switches on the mech. Has small Crack in top left side trim. Holds 100
45RPM Records...
|
|
0 |
1,087 |
|
|
FS in MA: 77 Rowe RI2 by
[email protected]
1977 Rowe/AMI Jukebox: Fair Shape, When I plugged it in it scanned,
picked a record, and played it. Sounds fair. When the record was done
it
would not place the record back. The Record Basket is bent out of
shape and will probably need to be replaced, there is a small chip out
of the front trim....
|
|
0 |
583 |
|
|
Seeburg C non working selections. by
Roxy
I decided to go through my seeburg C to give it a tune up. I lubed and
oiled it and since I haven't used it in awhile, especially the B side
because of the needle brush, I tested all the coils. I noticed some
random selections on the B side not working. Now, when I got the box, I
went through the...
|
|
9 |
955 |
|
|
Rowe R-86 Pre Amp by
scunny01
I have a Rowe R-86 that when switched on plays full volume even with
the volume control disconnected from the amplifier chassis which,
according to the service manual requires me to replace the pre amp.
Does anyone have or know where i can buy one of these?
Cheers
Nathan
|
|
1 |
609 |
|
|
FS: Misc. Jukebox parts by
Hans Eilers
Below is a list of some Jukebox parts that I got with a bunch of arcade
parts. All of the boards are clean and complete, unless otherwise noted, but
they are untested. I accept PayPal and will ship anywhere in the US &
Canada. I do have pictures of all of the items listed. Email me with...
|
|
0 |
1,109 |
|
|
Seeburg Q160 Problem-Help by
[email protected]
Greetings,
I have a Seeburg Model Q160 that I'm having mechanism problems with.
The mechanism will keep cycling with out scanning. My first thought was
sticking mechanism parts but after removing the mech, I discovered it
is an electrical problem not mechanical. What happens during scanning
and...
|
|
1 |
1,067 |
|
|
|
|
0 |
370 |
|
|
seeburg 222 mech still dead by
flashbk13
Hi All,
Just got back from Israel and installed that new motor cap, mech still
dead (almost). The motor turns very slowly (either direction) a few
revolutions before stopping. Before connecting the cap, I measured .090
on both motor windings (digital meter on the lowest scale which is
2,000 ohms)....
|
|
6 |
1,170 |
|
|
New owner of Seeburg V200 needs help! by
[email protected]
Hi,
I recently bought a Seeburg V200 jukebox that was restored just a
couple of years ago. When I examined this box it played perfectly just
like the owner said it would as I punched several keys in trial and
error. I took the box and transported in the back of my truck home a
distance of 500...
|
April 15th 06 03:00 PM
by Jeff
|
9 |
866 |
|
|
|
|
0 |
523 |
|
|
FS: Pioneer CJ-V55 project/parts $145 New Jersey by
Max
For sale, project, parts, or convert to an MP3 player!
Has 2 CD changer units, no magazines. Lights up, but didn't seem to do
much else. I'm into pinballs, and don't have an interest in playing
with this.
located in Wall, NJ 07719. $145 or best offer. I will pull and ship
any parts...
|
April 14th 06 08:28 PM
by Max
|
0 |
576 |
|
|
|
|
0 |
433 |
|
|
Seeburg cartridge swap. by
psapinball
Looking to try a cartridge from a SS160 on an AY160 mech. Who has done
this and how does it work? What else should I be looking at when I
attempt this? Any help would be great. Thanks in advance.
Bret Fritch
|
|
5 |
710 |
|
|
Looking for an AMi R81... by
Retro Depot
Can anyone tell me where in eastern Canada I can find one of these. Doesn't
have to work, just needs to be complete.
Cheers, Steve
|
|
0 |
297 |
|
|
tone arm magnet needed! by
Robert in Ridgecrest, CA
I'm fixing a Rowe R-88 for a friend. I need a tone arm magnet (why it
would be missing I have no clue). I believe any r-xx series that played
45s should work. If anyone knows someone parting a juke out that has
the magnet for sale or a vender that would have one, it would be...
|
|
4 |
783 |
|
|
Kalamazoo Super Auction Time (Correction) by
Kevin Ketchum
The Kalamazoo Super Auction will start at 10:00 am on Saturday the 22 nd.
(In the past it has started at 1:00pm)
Please make a note of this, The Pinball at the 'Zoo website
www.pinballatthezoo.com has been updated day to reflect this.
Thanks Kevin
|
|
0 |
405 |