I have a 1989 Wurlitzer 1015-OMT that has the 4 light strips instead of bubblers. The Parts person in Chicago can barely understand I just want to know what bulbs were used on the strips as the strips are no longer available. In fcat I am not sure she ever did get the idea. So if anyone knows what...

Hi Odd one here, restoring a BalAmi Super Forty and the little plastic lugs off the end of the gripper bow on the transfer mech are both missing!! I cannot see that they have been chipped off or anyhting but its left me with a slack grip :) Anyone got one? I think it is the same as the bow on the...

Hi The small pulse transformer inside the pulse amp on my AY160 I'm rebuilding is broken. It T502 in the wiring diagram. Its a small cylindrical shape of which the end has popped off mine!! Anyone know where I can get a spare one or if need be a spare pulse amp (mine has been butchered in other...

Hi all: Let me try this again, I have a possible source for some parts, but need the numbers to see if they're the same as on my 442. I need the part numbers for the title strip frame and holders are the on the 474. Thanks Drnec

Hello everyone. I have found an unrestored Wulitzer 2304 that is in great shape except for some minor scratches on the cabinet. Sounds great also. They are asking $3000 which seems high. What do you guys think? I'm sure I could get it cheaper but I don't know what to offer for it. I want one...

Specifically on a pre amp type TPAU-1 in a Seeburg K200. Anyone have a cheat sheet on what resistors to change to what values to make a silicon (2n3906) work?

What's the fix for error 103 on a rockola 483? Where can I purchase a service manaul? Thanks

Anyone have a phone number of a Jukebox repairman Dan Colabuno from Ohio. I have a phone that is about 2 years old but it must be changed. Thanks for any help.

i have a nsm galaxy cd jukebox and i just found the programming and code information on the internet. i understand the service plunger, i understand the keypad with the "c" and "h" , but i can figure out how you actually program it. What are all these P01...P43??? can anyone dummy it up for me,...

Can anyone tell me what this part is? I'm definitely not a juke guy and maybe someone will know what this is. Thanks http://www.oldschoolarcade.net/jukepart.html

I have a very large console type cabinet that has a phono in the top that is visible thru a glass door. It is marked Continuelle made by the Plymouth Radio and Phonograph Co. It has an Operadio amplifier in the bottom with 4 tubes as well as some strange mechanism on the lower inside with a few...

Ok guys need some advice and help. I got everything hooked up right thanks to Ken in texas... with those wonderful pictures. My problem now after fighting with the juke. got the Jam unjammed, machine will pickup a record, play but doesn't reject it. Where do I begin to troubleshoot this...

I found it was moving and causing a loud hum for a second, or sometimes I would lose the base,then I would wiggle it and all was good again. Well it kept happening and I bent the prongs out just slightly,well I thought I had it fixed then last night when I was selecting a song I think it shook it...

Hello Together, i have a Seeburg ESPS 160 at home - and in the GreyBox of this Seeburg are 2 Transistor with the signature Q3720 and Q3722. I don´t can´t find a value for this Transistors. Can anyone help me ? They seems to be a part of a circle to controlled the Tornate. Thanks, Timo

Hi guys and girls. I have very big problem. I'm finishing my studies and I made the jukebox to changind cd and dvd. Now I'm writing the description. I have to write the description of the old jukeboxes corstructions. I heve to describe records changing mechanism on this jukeboxes. The same problem...

Good Morning Everyone, I have recently acquired a home in las vegas and have begun receiving a few classic jukeboxes. I have searched all over las vegas and there is not a single jukebox technician in the las vegas area. There are no major collectors of jukeboxes in las vegas as well. I need to...

Hi all Posted on this before but thought best start a new thread. I have issues on my Cont 2 with the pin pusher not having enough grunt to push the pins in, used to be ok but has got worse, so far I have 1) Replaced the recitfier (and added 2 fuses as suggested to protect the transformer) - Now...

I just bought a Rock-ola Trilogy on ebay, and could use a few things: 1) How do I set it for free play? 2) If I put in 3 or more songs in a row on the same CD, it plays 2 songs, and then puts the CD back, scans 100 discs, and then pulls the same CD back, and plays the next 2. Any way of changing...

I'm repairing an 825-10 amp but don't have a schematic. If you have a copy, could you scan it and attach it to an email direct to me I believe the 825-10 was used in the 8800 series. I've rebuilt the amp and suspect some of the voltages are off. A schematic would be...

I'm looking for someone who can do some quality troubleshooting and repair on a Seeburg C and R. Both were fully restored 5 years ago but are acting flaky and sounding bad. Sorry to say, they haven't been played in 2 years. I'm located in Raleigh North Carolina but will do some travel for...