If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TECH: ROCK-OLA 477
Rock-ola 477 Max help needed - Powers up with lights - Power Supply
board has 2 LED Lit. No other lights are lit. I have the manual but wanted to see if any Rock-ola expert knows where to go from here. Selector display board is blank along with hit tracker box. Amp box has no lights also. John |
Ads |
#2
|
|||
|
|||
TECH: ROCK-OLA 477
John,
Which LED's are lit? There should be an LED for the +9.6 VDC, -21 VDC and the +32 VDC. If the unit is dead, I would assume the +9.6 is the one not lit. This is the setup voltage for the 5 VDC Regulator, which is the logic power. You have a fuse at F101 which protects this part of the power supply. With more info about the box, maybe I can give better advice. Respectfully, David Rebber Jordan Amusement Co., Inc. Lubbock, TX |
#3
|
|||
|
|||
TECH: ROCK-OLA 477
Hello, i have a question to for a 477..
How do i set the dipswitches in the coin unit to have 8 plays for one coin ? Is it possible to download the pages from the manual explaining the settings , i have no manual Leon from http://www.flipper-pinball-fan.be "DRebber" schreef in bericht ... John, Which LED's are lit? There should be an LED for the +9.6 VDC, -21 VDC and the +32 VDC. If the unit is dead, I would assume the +9.6 is the one not lit. This is the setup voltage for the 5 VDC Regulator, which is the logic power. You have a fuse at F101 which protects this part of the power supply. With more info about the box, maybe I can give better advice. Respectfully, David Rebber Jordan Amusement Co., Inc. Lubbock, TX |
#4
|
|||
|
|||
TECH: ROCK-OLA 477
On Mar 1, 1:26*am, "news" wrote:
Hello, i have a question to for a 477.. How do i set the dipswitches in the coin unit to have 8 plays for one coin ? Is it possible to download the pages from the manual explaining the settings , i have no manual Leon fromhttp://www.flipper-pinball-fan.be "DRebber" schreef in ... John, Which LED's are lit? *There should be an LED for the +9.6 VDC, -21 VDC and the +32 VDC. If the unit is dead, I would assume the +9.6 is the one not lit. *This is the setup voltage for the 5 VDC Regulator, which is the logic power. *You have a fuse at F101 which protects this part of the power supply. With more info about the box, maybe I can give better advice. Respectfully, David Rebber Jordan Amusement Co., Inc. Lubbock, TX- Hide quoted text - - Show quoted text - Leon - Will send you an email next week with the price DIP Selectors in it... I work all this weekend and will need to scan it.. As for a manual - THere is nothing out there to download. I would scan it for you but the SCHEMATICS will not take on my scanner due to size. John |
#5
|
|||
|
|||
TECH: ROCK-OLA 477
John,
Ok but the pages with the dip-switch settings alone will do fine Thanks My mail address is leon.b1( at) scarlet.be "thabigwolf" schreef in bericht ... On Mar 1, 1:26 am, "news" wrote: Hello, i have a question to for a 477.. How do i set the dipswitches in the coin unit to have 8 plays for one coin ? Is it possible to download the pages from the manual explaining the settings , i have no manual Leon fromhttp://www.flipper-pinball-fan.be "DRebber" schreef in m... John, Which LED's are lit? There should be an LED for the +9.6 VDC, -21 VDC and the +32 VDC. If the unit is dead, I would assume the +9.6 is the one not lit. This is the setup voltage for the 5 VDC Regulator, which is the logic power. You have a fuse at F101 which protects this part of the power supply. With more info about the box, maybe I can give better advice. Respectfully, David Rebber Jordan Amusement Co., Inc. Lubbock, TX- Hide quoted text - - Show quoted text - Leon - Will send you an email next week with the price DIP Selectors in it... I work all this weekend and will need to scan it.. As for a manual - THere is nothing out there to download. I would scan it for you but the SCHEMATICS will not take on my scanner due to size. John |
#6
|
|||
|
|||
TECH: ROCK-OLA 477
On Feb 28, 4:52*am, thabigwolf wrote:
Rock-ola477Maxhelp needed - Powers up with lights - Power Supply board has 2 LED Lit. No other lights are lit. I have the manual but wanted to see if any Rock-ola expert knows where to go from here. Selector display board is blank along with hit tracker box. Amp box has no lights also. John Hi John, I know this sounds stupid, but, have you checked the internal fuses in the power supply. It woul seem your problem is here as you have power lights, and the lights themselves work so your 240v line seems fine, it will probably be your 9.6v line thatis down as thats he one that controls the logic. You hould disconnect the hit tracker as you wont need this for home us, and if it goes down it will take other chips with it. As an extra, if you have a sub board on the hit tracker (a small board between the hit tracker and the incoming cable) have a look at the chip on this board, you usually find that its the same one as the logic board I think (I thnk its the logic board, anyway its one they don't make anymore). If your fuses are OK, try to disconnect each module (amp, logic, mech board etc) and see if any of them are bringing the power supply down. If not, although it is unusual, try the small board on top of the powr supply. Try Leon at he has some stuff for the 477 and he is a nice bloke, very approachable. Best of luck |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TECH Rock-ola 476 issues | JoshBrown | Juke Boxes | 2 | January 22nd 08 03:35 AM |
TECH: Rock-ola 445 | [email protected] | Juke Boxes | 2 | July 23rd 07 02:26 PM |
tech: rock-ola 478 won't select | pjpin | Juke Boxes | 1 | June 27th 06 11:02 PM |
Tech help: Rock ola # 1448 | [email protected] | Juke Boxes | 5 | September 21st 05 12:09 PM |
Tech: Rock-ola 460 | Mike Brower | Juke Boxes | 1 | April 29th 04 03:32 AM |