If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wien 8td3
I have a player as above but the outlet plug is too big for any
sockets on my new setup. The plug is something like a super vid but bigger. It has four pins around the edge. Where can i get a plug that will convert it to more modern sockets? Or can i cut the plug off and fit What? I would like to plug it into the sound card on my comp. |
Ads |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
If you mean that 4-pin plug is your audio outlet plug from a tape
player, you need to either cut it off and splice on RCA jacks, then adapt that down to the soundcard plug (radio shack splitter cord)... OR buy a female 4-pin plug with lead wires hanging from it, and splice your soundcard deal into that with the appropriate plugs. Radio Shack carries all that stuff. |
Thread Tools | |
Display Modes | |
|
|