Rockola 1448 selection trouble

Have a rockola 1448 that doesn't want to stop looking for selections
even though it played the last reord.It'll keep searching as long as
it's plugged in,LOL
Any helpm appreciated.Just order a schematic on greedbay

Sounds like your cancel circuit isnt working or you have a selection pin
that is not being completely re-set. Take your fingers and go all the
way around the circular pinbank and make sure all the selector pins are
centered {none selected} . If they are all centered and the machine
still wants to search, wiggle each one back and forth a bit, one may be
shorted and it takes only a small amount of corrosion or a piece of
smething to short them out. If you have to re-build the pinbank, thats
a fun project, you will need the maintenance manual for that. Jim

E-mail us at: