A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » Juke Boxes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Rowe AMI 100CD Jukebox



 
 
Thread Tools Display Modes
  #1  
Old July 1st 03, 12:14 PM
Craig Schneider
external usenet poster
 
Posts: n/a
Default Rowe AMI 100CD Jukebox

Hello, I am having a problem with my Rowe AMI 100CD Jukebox whereby I get
the following message:

Checksum E=100

The display then resets the ram and continues on to the above message.

Can anyone please advise me what this means and how I go about fixing the
problem..

Kind Regards

Craig


Ads
  #2  
Old July 1st 03, 05:49 PM
ge0ph
external usenet poster
 
Posts: n/a
Default

It could be a bad CCC unit or maybe just the eprom chip is bad. I would
first try to replace the eprom chip and if that don't work, replace the
whole CCC unit.


"Craig Schneider" wrote in message
news:1057057828.91130@webserver...
Hello, I am having a problem with my Rowe AMI 100CD Jukebox whereby I get
the following message:

Checksum E=100

The display then resets the ram and continues on to the above message.

Can anyone please advise me what this means and how I go about fixing the
problem..

Kind Regards

Craig




  #3  
Old July 2nd 03, 03:28 AM
KLR
external usenet poster
 
Posts: n/a
Default

On Tue, 1 Jul 2003 10:49:12 -0600, "ge0ph" wrote:

It could be a bad CCC unit or maybe just the eprom chip is bad. I would
first try to replace the eprom chip and if that don't work, replace the
whole CCC unit.


It's also quite possible and very likely that the mech control board
or CDM is faulty too - and the CCC is resetting the entire system (as
its supposed to) to try and re-establish communications with the mech
control. Make sure that the battery isnt flat (should be 3 - 3.6v)
and the EPROM (top left corner of board) is pushed into its socket
firmly as well.

I would advise checking the connectors to ensure that power is getting
to the mech control, CDM player etc - and that the ROWELINK is
correctly connected too to everything.

disconnect "accessory" things like wallboxes, IR remote board and bill
acceptor rowelink connections (if fitted) to ensure that they aren't
causing problems too



"Craig Schneider" wrote in message
news:1057057828.91130@webserver...
Hello, I am having a problem with my Rowe AMI 100CD Jukebox whereby I get
the following message:

Checksum E=100

The display then resets the ram and continues on to the above message.

Can anyone please advise me what this means and how I go about fixing the
problem..

Kind Regards

Craig




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rowe JAO-200 Bandstand selection stopping problem KLR Juke Boxes 4 June 29th 03 09:55 AM
Jukebox obsolescence... KLR Juke Boxes 0 June 29th 03 09:54 AM
Rowe CD100 problems... something new KLR Juke Boxes 1 June 29th 03 09:51 AM
FS: NSM, Rowe CD boxes Lloyd Thoburn Juke Boxes 0 June 27th 03 01:48 PM
Jukebox and wireless speakers Happy Seeburg Olympian Owner Juke Boxes 2 June 27th 03 07:17 AM


All times are GMT +1. The time now is 03:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CollectingBanter.
The comments are property of their posters.