If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#16
|
|||
|
|||
Quote:
I bought 20 shipping boxes from Uline http://www.uline.com/Product/Detail/...y-Fold-Mailers and I received them today. With Shipping and Tax for these boxes my bill was $185.00 so thats $10.00 a box that will be added to the Kits shipping charges. Multiple kits can definitely fit in one box as these boxes are 200# test and are adjustable up to 6 inches in depth. I built a jig to heat the brown pieces up so that they can be bent. Luckily I used scrap pieces of burl to test this procedure because I cracked a few pieces and melted a few others. I think I finally figured out how hot the gun needs to be and how long the heat needs to be applied. At his point I bought one 4 x 8 sheet of White and one 4 x 8 sheet of Brown which gave me 3 sets of White materials and 4 or 5 sets of Brown materials. So I basically have 3 complete kits at this time. Given that, I have 2 sets sold to Jay from California which leaves me with one set left over from the first batch. The 3rd set will go on a first come first go basis based upon who's check clears first. At this point, all the hard work has been done and all the ducks are lined up so I can reproduce these kits with a few days turnaround. This is possible because all the materials are readily available from my local distributor and all the templates and jigs are already made and have been proven. Oh... I still have to cut out the little pieces that go on the ends of the title strip holders as well as the pieces that go between the fluted glasses and top and front side of the Brown Hockey sticks. This process should go pretty quickly as I purchased a heavy duty Guillotine cutter specifically for these pieces. So to answer your question, If you send me the $325.00 plus the boxing and shipping fees from 07456 to your house, even if I dont have a kit made when I receive the money, by the time the check clears I should have a kit ready for shipping. Current "Potential Buyers/Interested Parties" information that I have: 2 kits for Jay from California, Have email, shipping address and phone number 1 kit for WildBill, Have email 1 kit for Nmacrae from Minnesota, Have email 1 kit for Terry S, Have no information 1 kit for CoinOpNY, Have email, shipping address and phone number 1 kit for Nigel from UK, Have email 1 kit (Maybe) for Dziedzk, Have email Just as a side note.... my kits will come with a 100% Satisfaction Guarantee.... If for any reason anyone who buys a kit from me is not 100% satisfied for any reason, As long as they return the entire kit to me un-used, I will gladly reimburse them the money spent for the kit. You are always welcome to contact me over the phone with any questions that you may have or you can also email me at: TribalRoadKing “insert at sign” OptOnline “insert dot” Net Payments can also be made using "PayPal" . Thanks for your interest Jeff Pluchino 68 Cheshire Lane Ringwood NJ 07456 973 962-6654 Last edited by JeffP : January 26th 13 at 06:02 AM. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SEEBURG R, LAMINATE KITS | [email protected] | Juke Boxes | 0 | February 27th 06 10:31 PM |
SEEBURG 100R LAMINATE KITS | [email protected] | Juke Boxes | 2 | December 20th 05 07:36 PM |
SEEBURG R LAMINATE KITS | Wayne | Juke Boxes | 0 | August 15th 05 04:17 PM |
Seeburg R Laminate Kits - Any Opinions? | [email protected] | Juke Boxes | 1 | August 11th 05 12:24 AM |
Seeburg Model 100R Laminate Kit | Wayne | Juke Boxes | 3 | December 1st 04 10:31 PM |