A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » 8 Track Tapes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

8-track supplies-recorders-all in ones-pads-replacement motors-align tapes-Ebay



 
 
Thread Tools Display Modes
  #1  
Old May 1st 05, 01:25 PM
trippingtoo8track
external usenet poster
 
Posts: n/a
Default 8-track supplies-recorders-all in ones-pads-replacement motors-align tapes-Ebay

http://cgi.ebay.com/ws/eBayISAPI.dll...MESE%3AIT&rd=1

http://cgi.ebay.com/ws/eBayISAPI.dll...MESE%3AIT&rd=1

http://cgi.ebay.com/ws/eBayISAPI.dll...MESE%3AIT&rd=1

http://cgi.ebay.com/ws/eBayISAPI.dll...MESE%3AIT&rd=1

http://cgi.ebay.com/ws/eBayISAPI.dll...MESE%3AIT&rd=1

Ads
  #2  
Old May 2nd 05, 04:21 PM
frschoonover
external usenet poster
 
Posts: n/a
Default

Dear Fellow 8 Track Enthusiasts

The #2 link of the custom made pressure pads are the same as the ones
that I have on the Ventures 8 Tracks that I won off of Ebay.They do
take up the entire space of the squares where the pressure pads go and
it does not affect sound quality.All 3 of my Ventures 8 Tracks sound
great.Not only that,I have one of these on a Sgt Pepper's Lonely Hearts
Club Band(Audiopack Capitol white colored shell cart)that I won off of
Ebay recently.The only difference between my Ventures carts and this is
that there is a little piece of Scotch tape across it.Will the Scotch
tape affect overall play quality?I did test it and it sounded good and
it successfully changed to the next program but will the overall be
affected over time?Please inform.Thanks.Sincerely Frank R.Schoonover

  #3  
Old May 2nd 05, 09:39 PM
CAINE
external usenet poster
 
Posts: n/a
Default

The scotch tape won't hurt it- but I have found that it's better to run
the pads without tape on them- they have the added benefit of cleaning
excess loose graphite off the back of the tape- which leads to better
performance. One reason why the Akai 80-81-82 and Pioneer HR-99,100
sometimes don't switch tracks or trigger the auto-stop prematurely when
the sensing foil is not there- reason is those decks have such
sensitive channel switch circuitry (a good thing actually), that the
graphite, being slightly conductive, triggers the channel switch
circuit prematurely. i.e. it will drain the Akai channel switch
capacitor, then when the sensing foil comes along, there's nothing in
the capacitor to trigger the channel switch solenoid. Running the new
pads with no tape on them, cleans the tape actually.

As far as taking up the entire space behind the tape, if you look at
the improved spring pads on some RCA, etc. cars, they have larger pads
on them that extend from the top to bottom of space in cart. Taking up
all that space is a good thing, it gives the pad more stength to hold
against the tape, rather than try to bend over and tilt upwards or
downwards.

thanks for the good press !

trip

  #4  
Old May 2nd 05, 09:40 PM
CAINE
external usenet poster
 
Posts: n/a
Default

ps- your Ventures tapes got the once-over, I believe all the channel
switch splices were replaced, reinforced, and pads replaced too.

You're welcome !

thanks again

  #5  
Old May 3rd 05, 02:05 PM
8 tracker from hell
external usenet poster
 
Posts: n/a
Default

CAINE wrote:

The scotch tape won't hurt it- but I have found that it's better to run
the pads without tape on them- they have the added benefit of cleaning
excess loose graphite off the back of the tape- which leads to better
performance. One reason why the Akai 80-81-82 and Pioneer HR-99,100
sometimes don't switch tracks or trigger the auto-stop prematurely when
the sensing foil is not there- reason is those decks have such
sensitive channel switch circuitry (a good thing actually), that the
graphite, being slightly conductive, triggers the channel switch
circuit prematurely. i.e. it will drain the Akai channel switch
capacitor, then when the sensing foil comes along, there's nothing in
the capacitor to trigger the channel switch solenoid. Running the new
pads with no tape on them, cleans the tape actually.

As far as taking up the entire space behind the tape, if you look at
the improved spring pads on some RCA, etc. cars, they have larger pads
on them that extend from the top to bottom of space in cart. Taking up
all that space is a good thing, it gives the pad more stength to hold
against the tape, rather than try to bend over and tilt upwards or
downwards.

thanks for the good press !

trip



talkin to yourself again, noodles.

PLONK
--
i have an 8 track mind

My other computer is your XP box.
  #6  
Old May 4th 05, 01:31 PM
CAINE
external usenet poster
 
Posts: n/a
Default

thanks much for the good press Frank.

The piece of tape on the pad won't hurt anything. But actually, the
pads without the tape on them, work better- they pick up loose graphite
off the back of the tape and serve to clean the tape over time.

That loose graphite if not removed, will eventually end up on the FRONT
of the tape, and leads to the crackling noises and channels not
switching on some players.

The graphite is slightly conductive and can work havoc on some 8-track
decks' channel switch circuits. I've seen this phenomenon on Akai
80-81-82 decks and Pioneer HR-99, 100's

If you search the archives there is also a detailed explanation of the
pitfalls of the loose graphite buildup on the front of the tape.

ps- your Ventures tapes were given the standard service procedure here-
channel switch splice replaced, and reinforced (foil on both sides so
it will NEVER break- splicing tape is junk- foil tape is stronger- you
can use it to reinforce splices as well as the channel switch itself).

Also the pads were replaced as needed on your tapes.

enjoy !

  #7  
Old May 5th 05, 12:23 PM
CAINE
external usenet poster
 
Posts: n/a
Default

Frank- the tape on the pad will not affect sound quality. But you
really don't need the tape on it. I prefer to use those pads with no
slippery surface on them.

The original spring type pads also had no slippery surface.

Thanks for the plug- your tapes got the once over- new pads, new
splices, reinforced splices.

  #8  
Old May 5th 05, 03:18 PM
DeserTBoB
external usenet poster
 
Posts: n/a
Default

On 2 May 2005 13:39:08 -0700, "CAINE"
wrote:

The scotch tape won't hurt it- but I have found that it's better to run
the pads without tape on them- they have the added benefit of cleaning
excess loose graphite off the back of the tape- which leads to better
performance. snip


Bull****. More misinformation from Noodles.

Once that graphite is gone, it's GONE. Noodles' "aquarium filter
pads" are destructive and do not allow proper tape travel through the
leading guide and across the head.

For those who haven't figured it out, CAINE is Noodles. I've almost
got the information that Frank L. Schoonover is Noodles, also.

dB
  #9  
Old May 5th 05, 03:36 PM
DeserTBoB
external usenet poster
 
Posts: n/a
Default

On 4 May 2005 05:31:43 -0700, "CAINE"
wrote:

thanks much for the good press Frank. snip


Noodles, you're SOOOOO pathetic.

Funny how you pose to be a semi-retard and you do it so well!

By the way...you've been plonked (again) over in 8trackheaven.

dB
  #10  
Old May 5th 05, 03:44 PM
DeserTBoB
external usenet poster
 
Posts: n/a
Default

On 4 May 2005 05:31:43 -0700, "CAINE"
wrote:

thanks much for the good press Frank.

The piece of tape on the pad won't hurt anything. But actually, the
pads without the tape on them, work better- they pick up loose graphite
off the back of the tape and serve to clean the tape over time.

That loose graphite if not removed, will eventually end up on the FRONT
of the tape, and leads to the crackling noises and channels not
switching on some players. snip


More BS from our resident paranoid delusional, Noodles.

Get some Win-Gibs and throw out any "aquarium filter pads" from
Charlie Nudo...they will ruin your cartridges in short order.

dB
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LP/8 track comparison DeserTBoB 8 Track Tapes 28 December 13th 04 11:32 PM
Cassette-to-8 track adapters DeserTBoB 8 Track Tapes 5 November 25th 04 06:37 PM
8 track to CD-ROM...the plan, the solution? DeserTBoB 8 Track Tapes 4 November 21st 04 07:10 PM
Why 8 track sucks DeserTBoB 8 Track Tapes 32 November 17th 04 05:12 AM
Wise Wisdoms and Incidental Intellegences about 8 Track Tapes FirebirdFe 8 Track Tapes 0 October 25th 03 03:30 AM


All times are GMT +1. The time now is 02:22 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CollectingBanter.
The comments are property of their posters.