If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
NSM City 2 carriage unresponsive
I recently was asked to look at an NSM City 2 for a friend. They said it was functioning properly until a few days ago when the carriage suddenly stopped responding. Apparently some mice were making a nest in it recently. I took a look at it to see if any wires were obviously chewed through, and the only thing I found was a bit of one wire nibbled at which plugged into a PS/2 style connection on the board for the carriage connection. Also, it might be that the PCB on the carriage is burned out, possibly from mice, but not sure. The lady have no manuals for the machine, and any help would be appreciated if anyone knows what might be useful to fix it.
|
Ads |
#2
|
|||
|
|||
NSM City 2 carriage unresponsive
On Nov 14, 6:52*pm, James Prince James.Prince.
wrote: I recently was asked to look at an NSM City 2 for a friend. *They said it was functioning properly until a few days ago when the carriage suddenly stopped responding. *Apparently some mice were making a nest in it recently. *I took a look at it to see if any wires were obviously chewed through, and the only thing I found was a bit of one wire nibbled at which plugged into a PS/2 style connection on the board for the carriage connection. *Also, it might be that the PCB on the carriage is burned out, possibly from mice, but not sure. *The lady have no manuals for the machine, and any help would be appreciated if anyone knows what might be useful to fix it. -- James Prince Sounds like you got a fun one there James! I am not sure what ES system that uses. I am familiar with the ESIII type. On my main board there are several red LED power indicators for the various supply voltages. I would check these out first, make sure all are lit. Good luck Jeremy Agema |
#3
|
|||
|
|||
Hi guys,
Hi there i'm a fellow NSM Satellite 200 vinyl junkie! Was searching for a bit of support and advice out there and came across yourself. Is yours still working?? Regards, Wes in Melbourne, Australia |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB: NSM ESIV carriage | Merlin Amusements | Juke Boxes | 0 | March 11th 04 01:46 AM |
Working NSM carriage | Jim Blackburn | Juke Boxes | 0 | November 18th 03 10:03 PM |
Working NSM carriage | Jim Blackburn | Juke Boxes | 0 | November 18th 03 10:03 PM |
NSM City II Carriage WTB | Bob Shingledecker | Juke Boxes | 0 | October 3rd 03 08:20 PM |
NSM Prestige Es 160 Carriage | Jjmscf | Juke Boxes | 2 | September 9th 03 01:42 PM |