If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Quote:
I looked for your email when you originally said you were interested in these kits but could not find it. The same situation occured when I looked for another person in this post that suggested that I save his Email for a time when I actually have kits available. I am not sure why Forum Member Email addresses are not available to me, maybe I have a limited membership. Yes, I have done this quite a few times in the past and I really don't think its that big of a deal for the general Do It Yourselfer. Gluing the Laminate pieces is pretty easy if you take your time, but there is some dis-assembly of the cabinet involved prior to the laminating step. Please feel free to call me next week if you would like to to discuss this in detail. I live in Northern New Jersey and if you are also from NJ or closeby and you would like to stop by, I can show you in person exactly what needs to be done and how you need to do it. P.S. I do not understand what you meant when you said in your last post: "I really don't follow this NG much" Last edited by JeffP : December 2nd 12 at 06:01 AM. |
Ads |
#12
|
|||
|
|||
Seeburg HF100R DIY Cabinet Laminate Kits....
I live in Northern New Jersey and if you are also from NJ or closeby and you would like to stop by, I can show you in person exactly what needs to be done and how you need to do it. P.S. I do not understand what you meant when you said in your last post: "I really don't follow this NG much" +-------------------------------------------------------------------+ +-------------------------------------------------------------------+ -- JeffP Jeff -- I'm in Minnesota so a visit is unlikely, although the offer is appreciated. I read this newsgroup through Google groups, and I simply don't visit it often - maybe once a week normally. I don't get an email digest. That's all I meant. On the other hand, I also read rec.antiques.radio+phono and I visit it several times daily. Let me know what laminate pattern you decide on to replace the burl. Terry |
#13
|
|||
|
|||
Quote:
The laminate will fit under the chrome Boomerangs as well as the Side Speakers and the Coin Return Cup as stated earlier with one exception. The laminate will not go under the Cash Box Door Trim as stated earlier. Instead, it will be cut in such a fashion that will allow it to Butt up Flush with the Cash Box door Trim making the Cash Box door Trim appear to be recessed. |
#14
|
|||
|
|||
Quote:
. |
#15
|
|||
|
|||
Seeburg HF100R DIY Cabinet Laminate Kits....
JeffP wrote:
Hi John, .... Unfortunately, the Formica 1136 Chestnut Burl has been discontinued and I am currently looking for an alternative. .... You do realize that you can order custom Formica made...you can get exactly the burl and colour you want. You would only need a reasonable number of kits to make this feasible. http://www.formica.com.sg/custom-graphics John :-#)# -- (Please post followups or tech enquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#16
|
|||
|
|||
Quote:
Thats interesting John.... I deal with a Formica Distributor called "Larkin" in Paramus NJ, I'll check with them and see if that is a possibility and if it is would it be cost effective. Thank you for the information... I would have never even thought that was possible -- |
#17
|
|||
|
|||
Quote:
Count me in for one of the R kits. Keep me posted on the burl situation. I have two R's that I want to do this winter also. Will do one and see how it turns out. Thanks again. Bill wmdjacobs at the america on the line |
#18
|
|||
|
|||
Quote:
It's beginning to look like laminate made by Nevamar in the color Galloway Burl WZ0017T will be the next best substitute for the no longer available Formica 1136 Chestnut Burl unless someone else in this forum has a better suggestion. I have my Laminate guy checking with his distributor on the availability and he should be getting back to me shortly. If you Google Nevamar Galloway Burl WZ0017T you will see that it is a really nice looking substitute. Last edited by JeffP : December 5th 12 at 12:24 AM. |
#19
|
|||
|
|||
Here is an update,
I have finished making the 2 hardest wooden templates For the HR100R. The White section is dead on accurate when compared with 2 of my HF100R’s jukeboxes especially in regards to the front edge where it meets the Brown and the Cash Box door Trim. I think when you enlarge the photos of the cash box door trim section you will be pleasantly surprised on how nice and small the gap actually is between the trim and the White Laminate. The Brown section is dead on accurate when compared to a late 1990’s leftover kit piece that I had laying around. I still have to make a jig for the sections that go between the fluted glass pieces and the 2 little strips that go on the top of the Brown hockey sticks for lack of a better word Hope you enjoy these pictures. Talk to you soon. Jeff P. |
#20
|
|||
|
|||
Seeburg HF100R DIY Cabinet Laminate Kits....
On Dec 11, 9:33*pm, JeffP wrote:
Here is an update, I have finished making the 2 hardest wooden templates For the HR100R. The White section is dead on accurate when compared with 2 of my HF100R’s jukeboxes especially in regards to the front edge where it meets the Brown and the Cash Box door Trim. I think when you enlarge the photos of the cash box door trim section you will be pleasantly surprised on how nice and small the gap actually is between the trim and the White Laminate. The Brown section is dead on accurate when compared to a late 1990’s leftover kit piece that I had laying around. I still have to make a jig for the sections that go between the fluted glass pieces and the 2 little strips that go on the top of the Brown hockey sticks for lack of a better word Hope you enjoy these pictures. Talk to you soon. Jeff P. +-------------------------------------------------------------------+ |Filename: IMG_1156.JPG * * * * * * * * * * * * * * * * * * * * * * | |Download:http://www.collectingbanter.com/attachment.php?attachmentid=263| +-------------------------------------------------------------------+ -- JeffP Jeff, when do you anticipate kits will be available? I could start taking apart my R, but I don't really want it spread out across the basement for weeks :-) Terry |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SEEBURG R, LAMINATE KITS | [email protected] | Juke Boxes | 0 | February 27th 06 10:31 PM |
SEEBURG 100R LAMINATE KITS | [email protected] | Juke Boxes | 2 | December 20th 05 07:36 PM |
SEEBURG R LAMINATE KITS | Wayne | Juke Boxes | 0 | August 15th 05 04:17 PM |
Seeburg R Laminate Kits - Any Opinions? | [email protected] | Juke Boxes | 1 | August 11th 05 12:24 AM |
Seeburg Model 100R Laminate Kit | Wayne | Juke Boxes | 3 | December 1st 04 10:31 PM |