If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rockola Magazine Drive Motor noise
It seems like I have a clicking or ratcheting noise coming from my
magazine drive motor on my Rockola 460. It only happens at two areas on the magazine and they seem like they are opposite or 180 degrees from each other. Any ideas? Is there any maintenance that should performed on the motor? Thanks, Rob |
Ads |
#2
|
|||
|
|||
Rockola Magazine Drive Motor noise
Rob Blakeslee wrote:
It seems like I have a clicking or ratcheting noise coming from my magazine drive motor on my Rockola 460. It only happens at two areas on the magazine and they seem like they are opposite or 180 degrees from each other. Any ideas? Is there any maintenance that should performed on the motor? Thanks, Rob Is the magazine fully loaded with records? If only half full they can make different noises. If not full you can load it evenly, skipping spaces. Tony |
#3
|
|||
|
|||
Rockola Magazine Drive Motor noise
On Feb 19, 3:26*pm, Tony wrote:
Rob Blakeslee wrote: It seems like I have a clicking or ratcheting noise coming from my magazine drive motor on my Rockola 460. *It only happens at two areas on the magazine and they seem like they are opposite or 180 degrees from each other. *Any ideas? *Is there any maintenance that should performed on the motor? Thanks, Rob Is the magazine fully loaded with records? *If only half full they can make different noises. *If not full you can load it evenly, skipping spaces. Tony Tony, I think I got it figured out. It turns out one of the magnets came unglued. I believe the noise I was hearing was the magnet teetering in the housing on the last glue strip before it broke loose. I have re-glued it have it back together and it is quiet so far. Thanks, Rob |
#4
|
|||
|
|||
Rockola Magazine Drive Motor noise
Rob Blakeslee wrote:
On Feb 19, 3:26 pm, Tony wrote: Rob Blakeslee wrote: It seems like I have a clicking or ratcheting noise coming from my magazine drive motor on my Rockola 460. It only happens at two areas on the magazine and they seem like they are opposite or 180 degrees from each other. Any ideas? Is there any maintenance that should performed on the motor? Thanks, Rob Is the magazine fully loaded with records? If only half full they can make different noises. If not full you can load it evenly, skipping spaces. Tony Tony, I think I got it figured out. It turns out one of the magnets came unglued. I believe the noise I was hearing was the magnet teetering in the housing on the last glue strip before it broke loose. I have re-glued it have it back together and it is quiet so far. Thanks, Rob Good to hear, and thanks for letting us know what the problem was, many people don't. Tony |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Need 1422 Rockola motor | Filbey | Juke Boxes | 0 | May 29th 08 07:52 PM |
Roberts 808-Akai 80-81-82 drive motor-large 120 volt AC-$35 | trippin-2-8-track | 8 Track Tapes | 6 | December 15th 07 12:24 PM |
Rockola 1426 mech motor drive belt installation | [email protected] | Juke Boxes | 5 | February 12th 06 05:53 PM |
RCA 1600 film projector DRIVE MOTOR MODULE Mint In Pack | Ebayer | General | 0 | May 13th 05 01:45 AM |
RCA 1600 film projector DRIVE MOTOR MODULE Mint In Pack | Ebayer | General | 0 | May 5th 05 11:24 AM |