If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Question international cartridges
So I've bought a couple of inexpensive pens. They take the
"international" cartridges. I'm used to the Schaeffer cartridges and these "international" ones raise some questions. The ones that came with my new pens are exactly 1.5 inches long. I originally measured them in millimeters, about 38 mm, but tried inches and am amazed that they're an exact inch size. Anyway, I guess these are the "long international" cartridges, yes? I see someone with the nick "patek777" posting here in the ng about his sales of international cartridges on E-Bay. http://cgi.ebay.com/ws/eBayISAPI.dll...m=2247663 656 I notice that the picture he provides has a cartridge with a little collar part way up from the nipple end. My cartridges don't have this collar. Should this guy's cartridges work in my pens anyway? Does the Rotring Core, which I've just purchased and not received yet, take these same cartridges? Thanks for any help anyone can give me on this. |
Ads |
#2
|
|||
|
|||
The ones I have are 38 mm long too, they are international carts, they have
a collar too, it doesn't hinder their use though. Rotring uses int carts in all their pens, so yes, they will work in the Core. -- Cuba On 4-Jun-2004, R. Paul Martin wrote: So I've bought a couple of inexpensive pens. They take the "international" cartridges. I'm used to the Schaeffer cartridges and these "international" ones raise some questions. The ones that came with my new pens are exactly 1.5 inches long. I originally measured them in millimeters, about 38 mm, but tried inches and am amazed that they're an exact inch size. Anyway, I guess these are the "long international" cartridges, yes? I see someone with the nick "patek777" posting here in the ng about his sales of international cartridges on E-Bay. http://cgi.ebay.com/ws/eBayISAPI.dll...m=2247663 656 I notice that the picture he provides has a cartridge with a little collar part way up from the nipple end. My cartridges don't have this collar. Should this guy's cartridges work in my pens anyway? Does the Rotring Core, which I've just purchased and not received yet, take these same cartridges? Thanks for any help anyone can give me on this. |
#3
|
|||
|
|||
I bought some of those carts lst week.
I will let you know if they fit the CORE or not. William Lee On 4-Jun-2004, R. Paul Martin wrote: So I've bought a couple of inexpensive pens. They take the "international" cartridges. I'm used to the Schaeffer cartridges and these "international" ones raise some questions. The ones that came with my new pens are exactly 1.5 inches long. I originally measured them in millimeters, about 38 mm, but tried inches and am amazed that they're an exact inch size. Anyway, I guess these are the "long international" cartridges, yes? I see someone with the nick "patek777" posting here in the ng about his sales of international cartridges on E-Bay. http://cgi.ebay.com/ws/eBayISAPI.dll...m=2247663 656 I notice that the picture he provides has a cartridge with a little collar part way up from the nipple end. My cartridges don't have this collar. Should this guy's cartridges work in my pens anyway? Does the Rotring Core, which I've just purchased and not received yet, take these same cartridges? Thanks for any help anyone can give me on this. |
#4
|
|||
|
|||
"R. Paul Martin" wrote in message ... Anyway, I guess these are the "long international" cartridges, yes? nope - the long ones are about 3" long. Does the Rotring Core, which I've just purchased and not received yet, take these same cartridges? Thanks for any help anyone can give me on this. Core takes the 1.5" carts - the one I bought yesterday came with one suck inside the pen. I was trying to put the converter in and couldn't figure out why it wouldn't fit. duh... The Core will allow you to carry two of these international carts at one time inside the pen. And it will take a standard piston converter which is what I'm using. |
#5
|
|||
|
|||
KCat, I ordered med nib CORE but it is marked XL.
Is this a med nib or was there a mistake? I like the pen. The nib feels stiffer than those of my Pelikan 150 but the line width is about the same. It feels indestructible in my fingers. Also delivered were the Pelikan 200's and they are so pretty I don't want to ink them. William Lee "KCat" wrote in message ... "R. Paul Martin" wrote in message ... Anyway, I guess these are the "long international" cartridges, yes? nope - the long ones are about 3" long. Does the Rotring Core, which I've just purchased and not received yet, take these same cartridges? Thanks for any help anyone can give me on this. Core takes the 1.5" carts - the one I bought yesterday came with one suck inside the pen. I was trying to put the converter in and couldn't figure out why it wouldn't fit. duh... The Core will allow you to carry two of these international carts at one time inside the pen. And it will take a standard piston converter which is what I'm using. |
#6
|
|||
|
|||
"William Lee" wrote in message ... KCat, I ordered med nib CORE but it is marked XL. Is this a med nib or was there a mistake? that's the med. the XS is the fine. I like the pen. The nib feels stiffer than those of my Pelikan 150 but the line width is about the same. oh yeah - the nib on mine is *solid* - I can see writing through multiple copies with this thing. It feels indestructible in my fingers. I'm disappointed that the "replacement" for this pen is the Skynn. Interesting pen but from what I hear nothing of the sturdy-ness of the Core. indestructible is a good way to describe the core. I'm was suprised by how solidly built it really is. I believe they could make something similar to the Core with a more conventional grip and a little less "ugly" to it that would sell well enough to keep it in production. But I could be wrong. :P Also delivered were the Pelikan 200's and they are so pretty I don't want to ink them. ink ink ink... which 200s did you get? Translucents? Marbled? Love my 200s. |
#7
|
|||
|
|||
"R. Paul Martin" wrote in message ... So I've bought a couple of inexpensive pens. They take the "international" cartridges. I'm used to the Schaeffer cartridges and these "international" ones raise some questions. The ones that came with my new pens are exactly 1.5 inches long. I originally measured them in millimeters, about 38 mm, but tried inches and am amazed that they're an exact inch size. Anyway, I guess these are the "long international" cartridges, yes? I see someone with the nick "patek777" posting here in the ng about his sales of international cartridges on E-Bay. http://cgi.ebay.com/ws/eBayISAPI.dll...m=2247663 656 I notice that the picture he provides has a cartridge with a little collar part way up from the nipple end. My cartridges don't have this collar. Should this guy's cartridges work in my pens anyway? Does the Rotring Core, which I've just purchased and not received yet, take these same cartridges? Thanks for any help anyone can give me on this. You've got a short international cartridge, not a long one. The carts in the photo of your link will work okay. That little indentation doesn't matter. The Core will take either the long or the short. I prefer the long because of the view ports. If you use the short, insert one and reverse another to store it in the barrel as a spare. BTW, the Core has a little orange(!) gizmo that's supposed to facilitate the removal of cartridges. IMO, it's nothing but a PITA and so I removed it by pinching the ends together and sliding it out of the section. Removal has not affected performance in any way, shape, or form other than to make unscrewing the barrel from the section easier and preventing the cartridge from dropping out unceremoniously. -- ~~Bluesea~~ Spam is great in musubi but not in email. Please take out the trash before sending a direct reply. |
#8
|
|||
|
|||
"Bluesea" wrote in message ... BTW, the Core has a little orange(!) gizmo that's supposed to facilitate the removal of cartridges. that's what that is! how on earth is it supposed to work? i filled the converter immediately as I don't care for cartridges much. and is that what is rOtring trying to say with "force resource"? oh well - makes no nevermind to me as I'll keep the converter in it and a little extra effort for putting the barrel back on is no biggee. |
#9
|
|||
|
|||
"KCat" wrote in message news "Bluesea" wrote in message ... BTW, the Core has a little orange(!) gizmo that's supposed to facilitate the removal of cartridges. that's what that is! how on earth is it supposed to work? i filled the converter immediately as I don't care for cartridges much. and is that what is rOtring trying to say with "force resource"? oh well - makes no nevermind to me as I'll keep the converter in it and a little extra effort for putting the barrel back on is no biggee. When you unscrew the barrel from the section, the gizmo hooks onto something, the little ridge just inside the barrel?, and uses your removal of the barrel to separate the cartridge from the section. My newly arrived Balium and other pen don't have the gizmo nor the ridge so I'm wondering if people complained about their cartridges dumping ink into their laps or something, resulting in production runs that eliminated them. Don't know about "Force Resource" - it's on my Balium and the other, too. -- ~~Bluesea~~ Spam is great in musubi but not in email. Please take out the trash before sending a direct reply. |
#10
|
|||
|
|||
KCat wrote:
Core takes the 1.5" carts - the one I bought yesterday came with one suck inside the pen. I was trying to put the converter in and couldn't figure out why it wouldn't fit. duh... Just to clarify, the 3" cartridges (at least those from Waterman) also fit just fine in a Core. Generally, any pen that fits the short will fit the long as well. The main exception is if the end of the pen (farthest away from the nib) is very short or very slim - obviously not a problem with the Core. :-) David |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ink cartridges (WATERMAN) Is it true ? | patek777 | Pens & Pencils | 8 | April 21st 04 12:14 AM |
Duofold International Repair | Ken Freeman | Pens & Pencils | 5 | December 31st 03 08:16 PM |
Geha Ink Cartridges | DoTTy76 | Pens & Pencils | 1 | December 26th 03 05:23 AM |
Cartridges for Platignum | Jeff Miars | Pens & Pencils | 3 | December 16th 03 09:21 AM |
Do Waterman cartidges == international? | Anthony Delorenzo | Pens & Pencils | 4 | August 6th 03 12:56 PM |