If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help with Wurlitzer 1800
Hi, I got a Wurlitzer 1800 but it has a problem. I have order the
manuals but wanted to see if anyone had a solution so I can work on it this weekend. I insert coin it registers on the switch in the coin box. A motor turns just above the switch and the add solenoid pulls in moving one tooth on the spocket. But that is all. The latch bar solenoid does energizes nor does the make selection light come on. I check the plug going from the coin box to the back of the mech and all seems good for continuity. I see that it comes out of the mech on the front side on 2 plugs. I do not know how the circuit is supposed to work so any help would be great. Thanks for reading. Bret Oak Harbor, Washington |
Ads |
#2
|
|||
|
|||
Help with Wurlitzer 1800
So it DOES, or DOESN'T energize the lock bar solenoid? The way you described
it doesn't make sense. I'm also trying to remember what kind of service switch an 1800 has. Sometimes it's as simple as that. "psapinball" wrote in message ... Hi, I got a Wurlitzer 1800 but it has a problem. I have order the manuals but wanted to see if anyone had a solution so I can work on it this weekend. I insert coin it registers on the switch in the coin box. A motor turns just above the switch and the add solenoid pulls in moving one tooth on the spocket. But that is all. The latch bar solenoid does energizes nor does the make selection light come on. I check the plug going from the coin box to the back of the mech and all seems good for continuity. I see that it comes out of the mech on the front side on 2 plugs. I do not know how the circuit is supposed to work so any help would be great. Thanks for reading. Bret Oak Harbor, Washington |
#3
|
|||
|
|||
Help with Wurlitzer 1800
My bust on the typing. It does not energize. It's not the service
switch either because it did work then stopped suddenly. Thanks for writing and hope someone might have an idea so I can work on it this weekend. If not i will try when the manuals arrive. Bret |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wurlitzer 1800 Value? | [email protected] | Juke Boxes | 2 | October 28th 07 07:19 PM |
Tech Help - Wurlitzer 1800 amp | [email protected] | Juke Boxes | 3 | June 30th 06 06:22 AM |
Wurlitzer 1800 Restore | stoli | Juke Boxes | 1 | July 29th 05 05:44 PM |
wurlitzer 1800 | Fred | Juke Boxes | 0 | December 11th 04 09:11 AM |
Looking for Wurlitzer 1800 parts | Rene Lengemann | Juke Boxes | 0 | April 5th 04 12:19 AM |