If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
wurlitzer boac free play
I can't find my notes on this. I remember that you can unplug the boac
and install 1 jumper wire for free play. Anyone know which pins to jumper? Thanks, Tony |
Ads |
#2
|
|||
|
|||
On Wed, 20 Aug 2003 23:25:45 GMT, Tony Miklos
wrote: I can't find my notes on this. I remember that you can unplug the boac and install 1 jumper wire for free play. Anyone know which pins to jumper? Jumper pin 2 to pin 6 on the "BO/AC" socket. I've done this on a couple of 3800's... I'm assuming it's the same for any others that used the BO/AC. |
#3
|
|||
|
|||
I have the schematics for the old BO-AC (and the programming info) if
anyone wants to try to fix those suckers. I've had success (have the old test power/switch box from Wurlitzer for these) but they are a PITA to fix. TTL counters and feedback loops...great fun, also a +5VDC regulator that is total garbage - very common flaw, I substitute a 7805 in place of the Wurlitzer circuit if there is no +5 or it is low, fixes about 50% of the dead boxes. John :-#)# On Thu, 21 Aug 2003 00:19:48 -0400, Russel Willoughby wrote: On Wed, 20 Aug 2003 23:25:45 GMT, Tony Miklos wrote: I can't find my notes on this. I remember that you can unplug the boac and install 1 jumper wire for free play. Anyone know which pins to jumper? Jumper pin 2 to pin 6 on the "BO/AC" socket. I've done this on a couple of 3800's... I'm assuming it's the same for any others that used the BO/AC. (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#4
|
|||
|
|||
Russel Willoughby wrote:
On Wed, 20 Aug 2003 23:25:45 GMT, Tony Miklos wrote: I can't find my notes on this. I remember that you can unplug the boac and install 1 jumper wire for free play. Anyone know which pins to jumper? Jumper pin 2 to pin 6 on the "BO/AC" socket. I've done this on a couple of 3800's... I'm assuming it's the same for any others that used the BO/AC. Thank you! (and thanks to the guy who emailed me too) -- Tony |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
# Get FREE Sony VAIO, iPod, Xbox, PlayStation, or Cell Phone when you spend $40..!! | TSR | Autographs | 0 | October 6th 04 11:05 AM |
# Get FREE Sony VAIO, iPod, Xbox, PlayStation, or Cell Phone when you spend $40..!! | TSR | 8 Track Tapes | 0 | October 6th 04 11:05 AM |
FREE 3-day trial of membership to Matt's Celebrity Hangout | Matt George | Autographs | 1 | December 6th 03 07:32 AM |
free autograph booklet | Peter | Autographs | 0 | July 22nd 03 06:48 PM |
Wurlitzer 3000 visible mechanism juke plus extra parts for sale- $250 | ThomasTeeter | Juke Boxes | 0 | July 12th 03 03:23 AM |