If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Trying to Restore Wurlitzer 3600 Superstar
Hey Guys,
I've just purchased a Wurlizter 3600 Superstar. I'm trying to get it into working condition. I've jumped the BO/AC with a wire. I think I've narrowed down my main problem to this: If I choose "Scan" nothing happens, but if I lift the record gripper and then depress the saftey switch (manually) the record cassette spins around. Once I go back to "Run" mode it will reset back to the home postion (but only if I keep holding the Gripper and depress the saftey switch). I have a copy of the manual and tried to "adjust" the Transfer swtich. However, all the gears are locked in place and I can't get anything to move. Do you guys have any ideas of ways I should move forward? Also, my florescent lights (new bulbs) do not turn on each time I power on the jukebox, I need to jiggle them around a bit. Any suggestions on that? Thanks in Advance |
Ads |
#3
|
|||
|
|||
The fold out schematics have a good troubleshooting guide. This should
come with the manuals from Victoryglass, otherwise we can make you a copy for a few $$. John :-#)# On 17 Jun 2004 05:52:50 -0700, (Chris Mar) wrote: I was able to get my issue fixed last night. The pin on the lower part of the jaws was not seated behind the hook correctly, so the safety switch was not depressed. Now, I'm onto my new problem. I hit the buttons but nothing seems to happen. I need to debug the selecting a song and follow the sequence of operation. Does anyone know a webpage that goes into details on this? Thanks, Chris (Chris Mar) wrote in message . com... Hey Guys, I've just purchased a Wurlizter 3600 Superstar. I'm trying to get it into working condition. I've jumped the BO/AC with a wire. I think I've narrowed down my main problem to this: If I choose "Scan" nothing happens, but if I lift the record gripper and then depress the saftey switch (manually) the record cassette spins around. Once I go back to "Run" mode it will reset back to the home postion (but only if I keep holding the Gripper and depress the saftey switch). I have a copy of the manual and tried to "adjust" the Transfer swtich. However, all the gears are locked in place and I can't get anything to move. Do you guys have any ideas of ways I should move forward? Also, my florescent lights (new bulbs) do not turn on each time I power on the jukebox, I need to jiggle them around a bit. Any suggestions on that? Thanks in Advance (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wurlitzer 3600 - 3800 parts | R. Nash | Juke Boxes | 3 | September 4th 20 07:09 PM |
Wurlitzer 3600 cancel solenoid problems need advise | pacman1981 | Juke Boxes | 1 | April 6th 04 11:05 PM |
Wurlitzer 1900 Restore Question | Pudealee | Juke Boxes | 0 | February 17th 04 01:38 AM |
Wurlitzer 2000 and AMI i | Rene Lengemann | Juke Boxes | 0 | November 28th 03 02:17 PM |
Wurlitzer 3000 visible mechanism juke plus extra parts for sale- $250 | ThomasTeeter | Juke Boxes | 0 | July 12th 03 03:23 AM |