If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeburg M100C Motor Run Capacitor
I have to replace my motor run capacitor and the old one has no markings on it. Does anyone know how to wire up the new one.
Thanks |
Ads |
#2
|
|||
|
|||
Seeburg M100C Motor Run Capacitor
On Saturday, October 12, 2013 12:37:32 PM UTC-4, ultraliter wrote:
I have to replace my motor run capacitor and the old one has no markings on it. Does anyone know how to wire up the new one. Thanks I've seen some variations on wire colors on this circuit, so I'll list my wire colors and their destination. White wire to common - goes to reversing switch. Green wire to 1.0 - goes to the upper right terminal on the motor board and the "O" contact on the cam switch (2nd set from the top). Yellow wire to 1.4 - goes to the "O" contact on the cam switch. Hope this is helpful. Ray -- ultraliter |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seeburg Motor Capacitor | wdlanning | Juke Boxes | 2 | September 6th 08 07:33 PM |
need help with a 52 seeburg M100C | [email protected] | Juke Boxes | 3 | September 28th 07 11:57 PM |
Capacitor question on a Seeburg C | rmoody1695 | Juke Boxes | 6 | November 17th 05 08:23 PM |
Seeburg M100C | dave99 | Juke Boxes | 9 | October 17th 05 02:47 PM |
WTB: Seeburg M100C | Gerard Cranston | Juke Boxes | 0 | March 2nd 04 06:01 PM |