A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » Juke Boxes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Rowe/AMI CD100-C Forgetting Settings



 
 
Thread Tools Display Modes
  #1  
Old September 1st 18, 03:29 AM posted to alt.collecting.juke-boxes
Eric Woodland
external usenet poster
 
Posts: 8
Default Rowe/AMI CD100-C Forgetting Settings

As the subject states, my Rowe/AMI CD100-C keeps forgetting its settings after 1-2 days off. Do these have a CMOS battery that needs to be replaced as on a computer's motherboard? Thanks in advance for any info!
Ads
  #2  
Old September 1st 18, 08:38 PM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 901
Default Rowe/AMI CD100-C Forgetting Settings

On 2018/08/31 7:29 PM, Eric Woodland wrote:
As the subject states, my Rowe/AMI CD100-C keeps forgetting its settings after 1-2 days off. Do these have a CMOS battery that needs to be replaced as on a computer's motherboard? Thanks in advance for any info!


Yes, and it is a soldered in lithium battery. Rowe very nicely did not
use Ni-Cad rechargeable batteries which can leak with bad results for
the CD machines AFAIK!

Check across the battery - should be at least 2.5VDC to 3.0VDC. Below
that and it is time to replace it.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
  #3  
Old September 4th 18, 01:58 PM posted to alt.collecting.juke-boxes
Eric Woodland
external usenet poster
 
Posts: 8
Default Rowe/AMI CD100-C Forgetting Settings

Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric
  #4  
Old September 4th 18, 03:45 PM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 901
Default Rowe/AMI CD100-C Forgetting Settings

On 2018/09/04 5:58 AM, Eric Woodland wrote:
Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric


Take the cover off the computer that is on the inside back wall of the
jukebox. It is the round thin cylindrical metal thingy soldered
(typically) to the circuit board.

Looks something like this:

https://allfixelectrical.com.au/prod...th-solder-tags

That supplier is a high on pricing though. The part number for the
battery should be visible, you can search for a supplier based on that.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
  #5  
Old September 4th 18, 04:04 PM posted to alt.collecting.juke-boxes
Eric Woodland
external usenet poster
 
Posts: 8
Default Rowe/AMI CD100-C Forgetting Settings

On Tuesday, September 4, 2018 at 10:45:18 AM UTC-4, John Robertson wrote:
On 2018/09/04 5:58 AM, Eric Woodland wrote:
Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric


Take the cover off the computer that is on the inside back wall of the
jukebox. It is the round thin cylindrical metal thingy soldered
(typically) to the circuit board.

Looks something like this:

https://allfixelectrical.com.au/prod...th-solder-tags

That supplier is a high on pricing though. The part number for the
battery should be visible, you can search for a supplier based on that.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."


Thanks, John! I'll pull the cover and see what I'm working with. Until then, I'll make sure to power-on the unit at least once daily so it doesn't forget the settings.

-Eric
  #6  
Old September 5th 18, 11:34 AM posted to alt.collecting.juke-boxes
J.B. Wood
external usenet poster
 
Posts: 18
Default Rowe/AMI CD100-C Forgetting Settings

On 09/04/2018 10:45 AM, John Robertson wrote:
On 2018/09/04 5:58 AM, Eric Woodland wrote:
Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric


Take the cover off the computer that is on the inside back wall of the
jukebox. It is the round thin cylindrical metal thingy soldered
(typically) to the circuit board.

Hello, and can a device that plays CDs or MP3s really be a "jukebox"?
At best it's a coin-operated media player ;-). Commercially viable,
yes, but do you really want to have it in your game room at home next to
your vintage pinball games? (OK, not everyone can shell out for a fully
restored Wurlitzer 1015). Sincerely, with vinyl in mind,


--
J. B. Wood e-mail:
  #7  
Old September 12th 18, 08:55 PM posted to alt.collecting.juke-boxes
Eric Woodland
external usenet poster
 
Posts: 8
Default Rowe/AMI CD100-C Forgetting Settings

On Tuesday, September 4, 2018 at 10:45:18 AM UTC-4, John Robertson wrote:
On 2018/09/04 5:58 AM, Eric Woodland wrote:
Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric


Take the cover off the computer that is on the inside back wall of the
jukebox. It is the round thin cylindrical metal thingy soldered
(typically) to the circuit board.

Looks something like this:

https://allfixelectrical.com.au/prod...th-solder-tags

That supplier is a high on pricing though. The part number for the
battery should be visible, you can search for a supplier based on that.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."


John - I soldered a 2xAA (3v) battery unit to the terminals and it's holding steady! Thanks again for the insight.

-Eric
  #8  
Old September 12th 18, 10:55 PM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 901
Default Rowe/AMI CD100-C Forgetting Settings

On 2018/09/12 12:55 PM, Eric Woodland wrote:
On Tuesday, September 4, 2018 at 10:45:18 AM UTC-4, John Robertson wrote:
On 2018/09/04 5:58 AM, Eric Woodland wrote:
Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric


Take the cover off the computer that is on the inside back wall of the
jukebox. It is the round thin cylindrical metal thingy soldered
(typically) to the circuit board.

Looks something like this:

https://allfixelectrical.com.au/prod...th-solder-tags

That supplier is a high on pricing though. The part number for the
battery should be visible, you can search for a supplier based on that.

John :-#)#

--


John - I soldered a 2xAA (3v) battery unit to the terminals and it's holding steady! Thanks again for the insight.

-Eric


I hope you have that battery pack off the board and out of the way -
long wires and store in a zip-lock baggie. Most non-lithium batteries leak.

Best to use a lithium instead of regular Alkaline AAs - you will forget
about the AAs and they WILL leak!

John :-#(#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
  #9  
Old September 28th 18, 06:14 PM posted to alt.collecting.juke-boxes
Eric Woodland
external usenet poster
 
Posts: 8
Default Rowe/AMI CD100-C Forgetting Settings

On Wednesday, September 12, 2018 at 2:55:07 PM UTC-7, John Robertson wrote:
On 2018/09/12 12:55 PM, Eric Woodland wrote:
On Tuesday, September 4, 2018 at 10:45:18 AM UTC-4, John Robertson wrote:
On 2018/09/04 5:58 AM, Eric Woodland wrote:
Thanks, John! Where exactly is that lithium battery located?

Regards,

Eric


Take the cover off the computer that is on the inside back wall of the
jukebox. It is the round thin cylindrical metal thingy soldered
(typically) to the circuit board.

Looks something like this:

https://allfixelectrical.com.au/prod...th-solder-tags

That supplier is a high on pricing though. The part number for the
battery should be visible, you can search for a supplier based on that..

John :-#)#

--


John - I soldered a 2xAA (3v) battery unit to the terminals and it's holding steady! Thanks again for the insight.

-Eric


I hope you have that battery pack off the board and out of the way -
long wires and store in a zip-lock baggie. Most non-lithium batteries leak.

Best to use a lithium instead of regular Alkaline AAs - you will forget
about the AAs and they WILL leak!

John :-#(#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."


John,

I picked-up a black plastic 2x AA holder along with velcro. Soldered the wires to the board and routed the holder to the outside of the housing where its affixed using the velcro. Easy to access/replace. I didn't bother with the plastic bag, because we are inside the unit frequently changing CDs, etc. I'll keep an eye on it though!

Regards,

Eric
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Help with Rowe CD100 C [email protected] Juke Boxes 7 July 5th 12 03:07 AM
Rowe ami cd100 paulbilly Juke Boxes 1 December 9th 06 03:01 PM
Will a display from a rowe cd100 fit a Rowe cd-51? BriMc Juke Boxes 1 January 23rd 05 02:46 AM
Rowe CD100 Help Jeff Baker Juke Boxes 3 October 6th 04 07:56 PM
TECH: Rowe-AMI jukebox forgetting selections BigBub Juke Boxes 20 September 24th 03 08:47 PM


All times are GMT +1. The time now is 10:01 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CollectingBanter.
The comments are property of their posters.