If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeburg STD160 - HELP!
I need help with the following problems. After storing my STD160 for a long time,
I plugged it in and turned it on. It allowed me to enter a selection from the keypad but the mechanism did not scan. After that I could no longer enter a selection from the keypad. I cleaned the contacts on the black & gray boxes, but no go. I disconnected both boxes and momentary connected a battery to the rca plug to the tormat to energize it. It then played all selections but I still can not enter a selection from the keypad. The display shows select any single and select any album & the current position of the mechanism. It does not display any number when the keypad is selected. Also while the mechanism is scanning the now playing / position only displays the 200's never the 100's. Could this be related? TIA Chuck ** Posted from http://www.teranews.com ** |
Ads |
#2
|
|||
|
|||
Seeburg STD160 - HELP!
On Fri, 01 Aug 2008 17:34:40 -0400, Fred wrote:
Chuck; There is a selection pass switch on the left side of the titlestrip glass, inside the machine. Make sure it is in the no position. Check the -13 and -27 VDC voltages on the test points on the side of the DCC. As to the selection playing indicator never displaying 100s, this is normal until a 100 selection record is played. The indicator is only accurate when an actual record is playing. For more info, check my website: http://home.pacbell.net/fmillera/index.htm Cheers, Tony Miller I need help with the following problems. After storing my STD160 for a long time, I plugged it in and turned it on. It allowed me to enter a selection from the keypad but the mechanism did not scan. After that I could no longer enter a selection from the keypad. I cleaned the contacts on the black & gray boxes, but no go. I disconnected both boxes and momentary connected a battery to the rca plug to the tormat to energize it. It then played all selections but I still can not enter a selection from the keypad. The display shows select any single and select any album & the current position of the mechanism. It does not display any number when the keypad is selected. Also while the mechanism is scanning the now playing / position only displays the 200's never the 100's. Could this be related? TIA Chuck ** Posted from http://www.teranews.com ** |
#3
|
|||
|
|||
Seeburg STD160 - HELP!
Thanks for the info.
I can't find the selection pass switch. My service manual shows one on the left side but my STD160 does not have one. I found a 6-pin connecter with four wires. This connector has black tape covering it. Was this a service mod? The juke did work without the switch before because I did not remove the switch. "Tony Miller" wrote in message ... On Fri, 01 Aug 2008 17:34:40 -0400, Fred wrote: Chuck; There is a selection pass switch on the left side of the titlestrip glass, inside the machine. Make sure it is in the no position. Check the -13 and -27 VDC voltages on the test points on the side of the DCC. As to the selection playing indicator never displaying 100s, this is normal until a 100 selection record is played. The indicator is only accurate when an actual record is playing. For more info, check my website: http://home.pacbell.net/fmillera/index.htm Cheers, Tony Miller I need help with the following problems. After storing my STD160 for a long time, I plugged it in and turned it on. It allowed me to enter a selection from the keypad but the mechanism did not scan. After that I could no longer enter a selection from the keypad. I cleaned the contacts on the black & gray boxes, but no go. I disconnected both boxes and momentary connected a battery to the rca plug to the tormat to energize it. It then played all selections but I still can not enter a selection from the keypad. The display shows select any single and select any album & the current position of the mechanism. It does not display any number when the keypad is selected. Also while the mechanism is scanning the now playing / position only displays the 200's never the 100's. Could this be related? TIA Chuck ** Posted from http://www.teranews.com ** ** Posted from http://www.teranews.com ** |
#4
|
|||
|
|||
Seeburg STD160 - HELP!
I also show a lid interlock switch in my manual. I can not locate this
switch anywhere in the jukebox. Could someone help me locate this switch? TIA "Tony Miller" wrote in message ... On Fri, 01 Aug 2008 17:34:40 -0400, Fred wrote: Chuck; There is a selection pass switch on the left side of the titlestrip glass, inside the machine. Make sure it is in the no position. Check the -13 and -27 VDC voltages on the test points on the side of the DCC. As to the selection playing indicator never displaying 100s, this is normal until a 100 selection record is played. The indicator is only accurate when an actual record is playing. For more info, check my website: http://home.pacbell.net/fmillera/index.htm Cheers, Tony Miller I need help with the following problems. After storing my STD160 for a long time, I plugged it in and turned it on. It allowed me to enter a selection from the keypad but the mechanism did not scan. After that I could no longer enter a selection from the keypad. I cleaned the contacts on the black & gray boxes, but no go. I disconnected both boxes and momentary connected a battery to the rca plug to the tormat to energize it. It then played all selections but I still can not enter a selection from the keypad. The display shows select any single and select any album & the current position of the mechanism. It does not display any number when the keypad is selected. Also while the mechanism is scanning the now playing / position only displays the 200's never the 100's. Could this be related? TIA Chuck ** Posted from http://www.teranews.com ** ** Posted from http://www.teranews.com ** |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
need help with coupler for Seeburg STD160 | Barnhart Pinball | Juke Boxes | 1 | January 27th 08 12:36 AM |
Seeburg STD160 help | Ken G. | Juke Boxes | 4 | January 18th 08 06:30 PM |
Need Help with a Seeburg STD160 | Bowlfull Salad | Juke Boxes | 0 | November 23rd 07 12:56 AM |
looking for colored plastic on STD160 Seeburg | Barnhart Pinball | Juke Boxes | 0 | June 13th 06 04:08 AM |
Seeburg STD160 tech help | Barnhart Pinball | Juke Boxes | 4 | January 5th 06 04:46 AM |