General Help and Trashcan #20 problem

New to this message board, but 15 years experience with all jukebox
types. I prefer Rockola, but own and repair any and all from the
30's-60's. I am located in N. California and check message boards 3 or
4 times a week. If you have a jukebox question or have something you
want information on, send me and email at:
If I can help I will. For the person with a #20 trashcan tray problem,
I would suspect the mech jammed and bent the cam follower used to
lower the turn table. Pull the shaft and remove the arm and you can
gently bend it back or find a replacement. There may also be a
shoulder type screw for minor adjustments to raise or lower the lift
arm, but 9 times out of ten, the machine has jammed on the way down
and bent the cam follower arm.

Scott