If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
NSM CityII ESII
I have a NSM city II it will scan find the correct record and start to load it. After getting it almost all the way in to the clamp the motor stops running.
The turn table motor is running I can turn the black motor by hand and it will finish loading and the tone arm sets down on the record but there still is no sound. Can anyone help me with this Please. I have a manual that the person I got it from had but cant see what keeps the motor running till it loads. Thank You for your Time Dave |
Ads |
#2
|
|||
|
|||
NSM CityII ESII
On 2018/10/09 5:17 PM, Dave N. wrote:
I have a NSM city II it will scan find the correct record and start to load it. After getting it almost all the way in to the clamp the motor stops running. The turn table motor is running I can turn the black motor by hand and it will finish loading and the tone arm sets down on the record but there still is no sound. Can anyone help me with this Please. I have a manual that the person I got it from had but cant see what keeps the motor running till it loads. Thank You for your Time Dave This could be mechanical, check the condition of the plastic cam lobes - are any split or the cam plastic body? I've seen that stop the load cycle early... John :-#(# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help!Quick! EsII,III mech ending 15 mins.FitPrestige Es 160? | Jjmscf | Juke Boxes | 0 | October 21st 03 12:44 PM |