If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
RO Gripper arm position adjustment
I've noticed that on my RO1454, that when odd selections are played
(gripper arm on left side) the arm is level with the turntable. When the arm is in the play position for even selections (gripper arm on right side), the arm is not level like it is when playing odd selections. There is no problem with the gripper picking and returning records; It is more of an appearance issue, but I also feel it should be adjusted correctly. I have looked at the Instruction Manual, and I am confused by the language...I'm just not that familiar yet with it. The IM mentions on page 4 "gripper arm stops" but does not show the location. On page 9 it describes Grip Cam Adjustments and limit switches. I don't know what I should be looking for to make the adjustment. Any help would be appreciated. Thanks again. Mike |
Ads |
#2
|
|||
|
|||
RO Gripper arm position adjustment
NJ Mike wrote:
I've noticed that on my RO1454, that when odd selections are played (gripper arm on left side) the arm is level with the turntable. When the arm is in the play position for even selections (gripper arm on right side), the arm is not level like it is when playing odd selections. There is no problem with the gripper picking and returning records; It is more of an appearance issue, but I also feel it should be adjusted correctly. I have looked at the Instruction Manual, and I am confused by the language...I'm just not that familiar yet with it. The IM mentions on page 4 "gripper arm stops" but does not show the location. On page 9 it describes Grip Cam Adjustments and limit switches. I don't know what I should be looking for to make the adjustment. Any help would be appreciated. Thanks again. Mike I'm trying to picture that but it's been a while. Is there simply a rest the center of the arm lands on? I'm sure AMI has what I'm picturing and I think R-O does also. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gripper motor gear | mailman4 | Juke Boxes | 0 | November 19th 09 06:36 AM |
Rockola Gripper Cam | James McClave | Juke Boxes | 0 | April 9th 09 11:15 PM |
Rockola 481 adjustment | Hello | Juke Boxes | 1 | November 14th 06 01:40 AM |
Help - Part needed - AMI gripper bow | [email protected] | Juke Boxes | 1 | July 13th 05 04:42 PM |
Adjustment marks???? | Bob Peterson | Coins | 8 | October 31st 03 10:01 AM |