If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wurly 1400
Hello,
Picked up a Wurlitzer 1400 - my first juke, and am in the process of attempting to restore. One problem I have encountered so far is the wiring inside the unit itself is very brittle (selector assembly, changer motor, etc.). My question is - are the plugs the wires go into serviceable? When I open the plug - I can't see how the wires attach to the inside of the socket... I am assuming it is some type of pin soldered into the end of the wire before being inserted, but an not sure... If that is the case - how/can I replace the wires that go into the plugs? Thanks! |
Ads |
#2
|
|||
|
|||
Wurly 1400
On Feb 20, 12:05*am, JJohn wrote:
Hello, Picked up a Wurlitzer 1400 - my first juke, and am in the process of attempting to restore. *One problem I have encountered so far is the wiring inside the unit itself is very brittle (selector assembly, changer motor, etc.). *My question is - are the plugs the wires go into serviceable? *When I open the plug - I can't see how the wires attach to the inside of the socket... *I am assuming it is some type of pin soldered into the end of the wire before being inserted, but an not sure... *If that is the case - how/can I replace the wires that go into the plugs? Thanks! john i think the wire is pushed into the plug then soldered. if you have a bad wire you can heat the end of the prong with a solder iron and pull on the wire at the same time and it will come out when heat is applied. i have 3 of those 1400 boxes. 1 working, 1 almost working and a parts box. all my wiring is okay. usually the wiring on wurlitzers are okay. older ami boxes are bad about it. im in missouri. thanks norm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wurly 2900 | Rexric | Juke Boxes | 0 | April 2nd 11 01:00 AM |
wurly scam | David O'Grady | Juke Boxes | 1 | September 1st 05 01:10 AM |
wurly cobra "?" | flashbk13 | Juke Boxes | 1 | August 10th 05 09:41 AM |
wurly cobra "?" | flashbk13 | Juke Boxes | 0 | August 10th 05 09:39 AM |
New owner of Wurly 2300S | Mike | Juke Boxes | 2 | November 24th 04 08:04 PM |