|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
June 23rd 12, 06:01 PM
posted to alt.collecting.juke-boxes
|
|||
|
|||
Seeburg USC-1 shipping bolts
I will soon be transporting a USC-1 cross-country in my Minivan (Chrysler).
Wisc. To Ariz. What do I need to do besides removing the records? It will be laying on its back. My VL200 came with shipping bolts to hold down the mechanism but, I don't see anything in the USC-1 manual about shipping. Is it possible the bolts from the VL200 would work? Thanks for any ideas. Glen 
|
| Ads |
|
#2
June 23rd 12, 08:09 PM
posted to alt.collecting.juke-boxes
|
|||
|
|||
|
Seeburg USC-1 shipping bolts
Arthur Dent wrote:
I will soon be transporting a USC-1 cross-country in my Minivan (Chrysler). Wisc. To Ariz. What do I need to do besides removing the records? It will be laying on its back. My VL200 came with shipping bolts to hold down the mechanism but, I don't see anything in the USC-1 manual about shipping. Is it possible the bolts from the VL200 would work? Thanks for any ideas. Glen Hi Glen, Yes, you should be able to use the V bolts. The frame has the holes and the cabinet should have an opening below to feed them into the underside. http://www.flippers.com/JukePinShipping.html John :-#)# -- (Please post followups or tech enquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out."
|
|
#3
June 24th 12, 11:54 PM
posted to alt.collecting.juke-boxes
|
|||
|
|||
|
Seeburg USC-1 shipping bolts
Thanks John. I'll take the VL200 bolts along.
Nice website. Glen "John Robertson" wrote in message ... Arthur Dent wrote: I will soon be transporting a USC-1 cross-country in my Minivan (Chrysler). Wisc. To Ariz. What do I need to do besides removing the records? It will be laying on its back. My VL200 came with shipping bolts to hold down the mechanism but, I don't see anything in the USC-1 manual about shipping. Is it possible the bolts from the VL200 would work? Thanks for any ideas. Glen Hi Glen, Yes, you should be able to use the V bolts. The frame has the holes and the cabinet should have an opening below to feed them into the underside. http://www.flippers.com/JukePinShipping.html John :-#)# -- (Please post followups or tech enquiries to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out."
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Seeburg USC 2 Firestar Bandshell nagging issue | Dave27 | Juke Boxes | 0 | January 8th 10 02:37 PM |
| FA: Vintage 1974 USC Trojans Football Souvenir Glass RARE | 84rms | General | 0 | September 21st 06 05:32 PM |
| FA: Vintage 1974 USC Trojans Football Souvenir Glass RARE | 84rms | General | 0 | September 21st 06 05:31 PM |
| USC-2 Seeburg credit issue. | Ebeneezer Geezer | Juke Boxes | 7 | January 18th 04 01:04 PM |
| How to prepare a Seeburg 100C for shipping | Bernie | Juke Boxes | 0 | July 5th 03 06:10 AM |
Linear Mode
