If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Tech.: Another United UPC100 problem
hi all,
I have a ground fault problem. If plugged into a ground fault receptical, it will pop the fault button it I try to use any of the mechanism logic. If I run the carousel directly (engage the indexing plunger) it runs ok, but if I try the start relay, left or right transfer relays, or lift up the popularity meter window cover lever, it trips the wall outlet. The fuses in the machine or the house circuit breaker do not blow/trip. This would explain why the ground blade was cut off of the cord. I installed a new plug (wired correctly) and have this problem. I have NOT tried using a regular wall socket. I am still unfreezing motors. Also, any thoughts on why one castor goes up into the socket higher than the rest? It looks ok from the outside. I swapped around the other castors to that location, the same problem, so at least I know all the castors are the same size. So that socket has some kind of problem. Thank you, Rick. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TECH. united UPC100 | flashbk13 | Juke Boxes | 6 | May 16th 17 01:31 AM |
TECH: Rockola 464 Problem #2 | [email protected] | Juke Boxes | 1 | September 17th 07 01:51 PM |
TECH: Rockola 464 Problem | [email protected] | Juke Boxes | 1 | September 13th 07 11:15 PM |
Tech Seeburg LS-2 Problem! | Bud Klass | Juke Boxes | 2 | July 22nd 06 01:25 PM |
Tech: Wurlitzer 3010 problem | Vintage Pinballs & Jukeboxes | Juke Boxes | 0 | April 9th 06 11:10 PM |