If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WURLITZER 2300S UPDATE
I went back and checked all of the plugs inside the machine. None of the
plugs were loose underneath the machine but I unplugged them all and replugged them. I did not see any plugs up by the keys. Here is what happens. When I press a letter then a number, the keys lock and the juke buzzes then releases the keys with a clunk. Nothing else happens. I looked inside though and the corresponding pins were raised on the large wheel but it did not turn. When I press the reset button on the keypad (?) nothing happens. When I press the reset button on the back of the machine the mechanism on top of the large wheel will spin around, find the first set of pins sticking up and push them down. If I press it again it will find the next set, etc. I'm at a loss, any ideas what to check next? |
Ads |
#2
|
|||
|
|||
have seen this problem before. what I have found is that the reject switch
in the amp is open on one side. if it is the open frame style you can clean it. check out my web site and send me an email if you have any further questions. in order to keep down the spam here and on the site you will have to delete all after my name and before the @, also you will have to put "jukebox" in the subject line. an example is below. the webpage is at http://webpages.charter.net/richklestinez rich "vapinguy" wrote in message news:MKrVc.5617$Ka6.4255@okepread03... I went back and checked all of the plugs inside the machine. None of the plugs were loose underneath the machine but I unplugged them all and replugged them. I did not see any plugs up by the keys. Here is what happens. When I press a letter then a number, the keys lock and the juke buzzes then releases the keys with a clunk. Nothing else happens. I looked inside though and the corresponding pins were raised on the large wheel but it did not turn. When I press the reset button on the keypad (?) nothing happens. When I press the reset button on the back of the machine the mechanism on top of the large wheel will spin around, find the first set of pins sticking up and push them down. If I press it again it will find the next set, etc. I'm at a loss, any ideas what to check next? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WURLITZER 2300S ASSISTANCE | Walt Burke | Juke Boxes | 6 | November 11th 06 11:14 PM |
wurlitzer 2300s selection problem | vinyl | Juke Boxes | 9 | February 1st 04 08:42 PM |
Wurlitzer 2000 and AMI i | Rene Lengemann | Juke Boxes | 0 | November 28th 03 02:17 PM |
Wanted Chips for Wurlitzer Credit and Control Computer on SL600 | John Robertson | Juke Boxes | 0 | August 27th 03 04:59 AM |
Wurlitzer 3000 visible mechanism juke plus extra parts for sale- $250 | ThomasTeeter | Juke Boxes | 0 | July 12th 03 03:23 AM |