If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rowe cd100 remote wires-wireless
Hi Group,
I am installing a wireless remote on my rowe cds 100. The remote kit did not come with a manual, and my jukes owners manual was printed before the remote came out. My question is off the remote brain inside the box there are three wires coming off, a black with white trace, a green, and a red, can someone tell me which lugs these wires are supposed to go to. Thank you, Brian |
Ads |
#2
|
|||
|
|||
On Tue, 20 Apr 2004 23:30:50 GMT, "BriMc"
wrote: Hi Group, I am installing a wireless remote on my rowe cds 100. The remote kit did not come with a manual, and my jukes owners manual was printed before the remote came out. My question is off the remote brain inside the box there are three wires coming off, a black with white trace, a green, and a red, can someone tell me which lugs these wires are supposed to go to. Thank you, Brian none of the rowe manuals tell you how to install the IR remote - the directions come with the IR kit the red and green wires are to go to each volume control, one wire is the left the other is the right. if you want single - you use one wire only - but Im not sure which - the 4 way dip switch sets whether you want the machine stereo - or 2 channel mono with one control for each channel (so for example if you want 2 sets of speakers in separate rooms and separate volume control for each) disconnect the existing volume pot from the terminal strip - and attatch the red wire from the remote control box to where the red wire from the pot was connected. try and adjust the volume via the IR - if no luck then remove the red and try the green instead. The black/white wire is used as an earth wire - but you arent supposed to connect it to earth unless you have audio hum problems. (take it to the terminal that is the common for the remote volume pot/cancel switch if you do have hum) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tech; Re IR remote for standard Rowe cd100??? | BriMc | Juke Boxes | 2 | April 1st 04 11:33 PM |
ROWE CD100 BILL ACCEPTOR NOT WORKING | Spookshow | Juke Boxes | 2 | March 6th 04 09:31 PM |
Rowe CD100 Question | Dave Wright | Juke Boxes | 1 | January 2nd 04 02:58 AM |
Rowe CD - 100 Remote controller system wanted | baraka | Juke Boxes | 0 | November 8th 03 01:36 PM |
Rowe CD100 problems... something new | KLR | Juke Boxes | 1 | June 29th 03 09:51 AM |