If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTB: Rowe CD-100 Power supply
I need a complete power supply assembly including transformer for a CD100 B
Rowe # 40770609 other may work also. Let me know what you have. Thanks Tom |
Ads |
#2
|
|||
|
|||
same transformer as 45 i have spare pcb for cdjuke+chassis for 45
"GameSales" wrote in message news:IGmmb.26486$B_2.13126@okepread02... I need a complete power supply assembly including transformer for a CD100 B Rowe # 40770609 other may work also. Let me know what you have. Thanks Tom |
#3
|
|||
|
|||
On Wed, 29 Oct 2003 23:39:06 GMT, "larry" wrote:
same transformer as 45 i have spare pcb for cdjuke+chassis for 45 "GameSales" wrote in message news:IGmmb.26486$B_2.13126@okepread02... I need a complete power supply assembly including transformer for a CD100 B Rowe # 40770609 other may work also. Let me know what you have. Thanks Tom have tried the 45rpm power supplies. They don't produce enough current and if you use one in a laserstar it will give intermittent faults. (Been there done that). This was in a machine with no accessories too. If you were to add accessories like a bill acceptor - IR volume control etc etc, this would only make the power situation worse. If you look at them side by side - you will see that the transformer on the 45 is substantially smaller and therefore a lower VA rating. If you were to upgrade the transformer in a 45 power supply to one that provided higher current - and raise the UF value of the filter capacitors fitted to the PCB - it would theoretically work as the design of the power supply PCB is much the same - as are the output voltages and connector configuration.. |
#4
|
|||
|
|||
Im parting out a CD-100-F Email me for pictures.Every part is for sale.Whats
left anyway. -- THANKS.MARK, MARKLINE VENDING BUY/SELL/TRADE/VIDEO GAMES VENDING MACHINES,SLOTS,PINBALLS OVER 100+CLASSIC VIDEO GAMES IN STOCK,ETC.ETC. 516-678-9671 "larry" wrote in message .com... same transformer as 45 i have spare pcb for cdjuke+chassis for 45 "GameSales" wrote in message news:IGmmb.26486$B_2.13126@okepread02... I need a complete power supply assembly including transformer for a CD100 B Rowe # 40770609 other may work also. Let me know what you have. Thanks Tom |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sad Day in Grand Rapids, Michgan | The G Man | Juke Boxes | 6 | September 6th 03 01:12 AM |
Wanted: Rowe R-87 schematics | Russel Willoughby | Juke Boxes | 2 | August 8th 03 05:04 AM |
FA: 128+ lots: Seeburg Wall-O-Matic Power Supply + Many pinball parts & Arcade items | Dave H. | Juke Boxes | 0 | July 15th 03 02:46 AM |
Rowe JAO-200 Bandstand selection stopping problem | KLR | Juke Boxes | 4 | June 29th 03 09:55 AM |
Rowe CD100 problems... something new | KLR | Juke Boxes | 1 | June 29th 03 09:51 AM |