Rock-ola 454 displays wrong record selection

I had a problem with my 454 a few months ago where the breaker would
kick off as soon as the arm was dropped down on a record. I never
figured out what was causing it or how to fix it, so I went and
changed out the whole record mech and this solved my problem After
changing the record mech, I noticed that the 10's are off by one
number for little over half of the selections, ie. when playing 100 it
displays 110. On the last row with the problem it will display two
10's, such as when 240 is playing it shows 2450. How do I fix this
problem? I know it has to be in the mech that I replaced, but I can't
seam to locate the problem.

I had this same problem when I first got mine, but my memory's a little
clouded. IIRC, I had to adjust the wheel to the left of the record
carousel. I'm almost certain that is what it was, and it did take a little
fine tuning until the numbers lit right.

Bill

wrote in message
...
I had a problem with my 454 a few months ago where the breaker would
kick off as soon as the arm was dropped down on a record. I never
figured out what was causing it or how to fix it, so I went and
changed out the whole record mech and this solved my problem After
changing the record mech, I noticed that the 10's are off by one
number for little over half of the selections, ie. when playing 100 it
displays 110. On the last row with the problem it will display two
10's, such as when 240 is playing it shows 2450. How do I fix this
problem? I know it has to be in the mech that I replaced, but I can't
seam to locate the problem.