If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
TECH: Seeburg LS 325
I am slowly but surely getting jukeboxes down. I have been reading
Harold Hagens 1st Seeburg ref book. What I have is this LS 325 will not move (scan) left or right. I can make it grab a record and it plays, but will not goto the next selection. Checked switches (not cleaned yet) all appears good. Going thru the (Harolds) book, but nothing really mentioned on this problem. I am planning on getting more of the books, but can use help from someone now. Thank you... |
Ads |
#2
|
|||
|
|||
TECH: Seeburg LS 325
On Apr 16, 5:12*am, "
wrote: I am slowly but surely getting jukeboxes down. I have been reading Harold Hagens 1st Seeburg ref book. What I have is this LS 325 will not move (scan) left or right. I can make it grab a record and it plays, but will not goto the next selection. Checked switches (not cleaned yet) all appears good. Going thru the (Harolds) book, but nothing really mentioned on this problem. I am planning on getting more of the books, but can use help from someone now. Thank you... You need to talk to Tony Miller- old Seeburg employee http://home.pacbell.net/fmillera/index.htm or John at www.flippers.com They both review this board but maintain sites also.... Check with one of them if you don't hear anything |
#3
|
|||
|
|||
TECH: Seeburg LS 325
On Wed, 16 Apr 2008 06:57:06 -0700 (PDT), pennyarcadecollector
wrote: I think you're saying that it won't automatically start scanning when you make a selection. In order for it to do this, the 'Selection Pass' switch on the Service Switch must be in the 'No' position. If this doesn't do it but hitting the 'Scan Start' switch does, check the Scan Start board in the DCC. It's the small board next to the Auto-Speed. Cheers, Tony Miller On Apr 16, 5:12*am, " wrote: I am slowly but surely getting jukeboxes down. I have been reading Harold Hagens 1st Seeburg ref book. What I have is this LS 325 will not move (scan) left or right. I can make it grab a record and it plays, but will not goto the next selection. Checked switches (not cleaned yet) all appears good. Going thru the (Harolds) book, but nothing really mentioned on this problem. I am planning on getting more of the books, but can use help from someone now. Thank you... You need to talk to Tony Miller- old Seeburg employee http://home.pacbell.net/fmillera/index.htm or John at www.flippers.com They both review this board but maintain sites also.... Check with one of them if you don't hear anything |
#4
|
|||
|
|||
TECH: Seeburg LS 325
On Apr 16, 8:46*pm, Tony Miller wrote:
On Wed, 16 Apr 2008 06:57:06 -0700 (PDT), wrote: I think you're saying that it won't automatically start scanning when you make a selection. *In order for it to do this, the 'Selection Pass' switch on the Service Switch must be in the 'No' position. *If this doesn't do it but hitting the 'Scan Start' switch does, check the Scan Start board in the DCC. *It's the small board next to the Auto-Speed. Cheers, Tony Miller On Apr 16, 5:12*am, " wrote: I am slowly but surely getting jukeboxes down. I have been reading Harold Hagens 1st Seeburg ref book. What I have is this LS 325 will not move (scan) left or right. I can make it grab a record and it plays, but will not goto the next selection. Checked switches (not cleaned yet) all appears good. Going thru the (Harolds) book, but nothing really mentioned on this problem. I am planning on getting more of the books, but can use help from someone now. Thank you... You need to talk to Tony Miller- old Seeburg employee http://home.pacbell.net/fmillera/index.htm or John atwww.flippers.com They both review this board but maintain sites also.... Check with one of them if you don't hear anything- Hide quoted text - - Show quoted text - I will look into this this weekend. Thanks for the help. |
#5
|
|||
|
|||
TECH: Seeburg LS 325
On Apr 16, 8:46*pm, Tony Miller wrote:
On Wed, 16 Apr 2008 06:57:06 -0700 (PDT), wrote: I think you're saying that it won't automatically start scanning when you make a selection. *In order for it to do this, the 'Selection Pass' switch on the Service Switch must be in the 'No' position. *If this doesn't do it but hitting the 'Scan Start' switch does, check the Scan Start board in the DCC. *It's the small board next to the Auto-Speed. Cheers, Tony Miller On Apr 16, 5:12*am, " wrote: I am slowly but surely getting jukeboxes down. I have been reading Harold Hagens 1st Seeburg ref book. What I have is this LS 325 will not move (scan) left or right. I can make it grab a record and it plays, but will not goto the next selection. Checked switches (not cleaned yet) all appears good. Going thru the (Harolds) book, but nothing really mentioned on this problem. I am planning on getting more of the books, but can use help from someone now. Thank you... You need to talk to Tony Miller- old Seeburg employee http://home.pacbell.net/fmillera/index.htm or John atwww.flippers.com They both review this board but maintain sites also.... Check with one of them if you don't hear anything- Hide quoted text - - Show quoted text - I should state that the lever is in normal play mode, turntable is spinning but, will not grab a record. If I push on a stack of switches(forget which one) it will grab the record and play fine. When that selection is done or rejected it will not play the next one. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seeburg R...Tech help needed | [email protected] | Juke Boxes | 2 | August 17th 07 06:04 AM |
Tech: Seeburg Disco | Mexa | Juke Boxes | 2 | May 13th 07 11:46 AM |
TECH: Seeburg R | [email protected] | Juke Boxes | 1 | December 22nd 06 04:16 PM |
TECH: Seeburg APFEAI | Ron | Juke Boxes | 1 | August 7th 05 10:43 PM |
Tech: Seeburg 160 help | Andreas Weller | Juke Boxes | 2 | March 4th 05 06:49 AM |