A collecting forum. CollectingBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CollectingBanter forum » Collecting newsgroups » Juke Boxes
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

NSM Error FF help



 
 
Thread Tools Display Modes
  #1  
Old September 24th 18, 03:39 PM posted to alt.collecting.juke-boxes
[email protected]
external usenet poster
 
Posts: 3
Default NSM Error FF help

My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?
Ads
  #3  
Old September 24th 18, 06:13 PM posted to alt.collecting.juke-boxes
[email protected]
external usenet poster
 
Posts: 3
Default NSM Error FF help

On Monday, September 24, 2018 at 10:39:58 AM UTC-4, wrote:
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?


I do but it not helpful with this error. Refers to either a record being stuck or the carriage off track. Neither is the problem.
  #4  
Old September 24th 18, 06:51 PM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 851
Default NSM Error FF help

On 2018/09/24 10:13 AM, wrote:
On Monday, September 24, 2018 at 10:39:58 AM UTC-4, wrote:
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?


I do but it not helpful with this error. Refers to either a record being stuck or the carriage off track. Neither is the problem.


I have seen some problems caused by weak batteries. I think that machine
uses the TimeKeeper series from Dallas, which means you have to
carefully take the top off (do a search for the process) and replace the
original battery with a new one.

Otherwise I don't have any great ideas, other than running the self
tests to see that all switches/optos respond as they should.

One other thing to consider is it may be the optos are dirty, take a
clean Q-tip and rub it in the gap (dry tip). If the machine is in a
smokers home then you may have to clean the optos with lens cleaner for
cameras.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
  #5  
Old October 5th 18, 01:31 PM posted to alt.collecting.juke-boxes
[email protected]
external usenet poster
 
Posts: 3
Default NSM Error FF help

On Monday, September 24, 2018 at 1:52:05 PM UTC-4, John Robertson wrote:
On 2018/09/24 10:13 AM, wrote:
On Monday, September 24, 2018 at 10:39:58 AM UTC-4, wrote:
My NSM Satellite 200 is giving ERR. FF. When I make a selection, the carriage starts to scan but then stops and gives ERR FF. Any ideas?


I do but it not helpful with this error. Refers to either a record being stuck or the carriage off track. Neither is the problem.


I have seen some problems caused by weak batteries. I think that machine
uses the TimeKeeper series from Dallas, which means you have to
carefully take the top off (do a search for the process) and replace the
original battery with a new one.

Otherwise I don't have any great ideas, other than running the self
tests to see that all switches/optos respond as they should.

One other thing to consider is it may be the optos are dirty, take a
clean Q-tip and rub it in the gap (dry tip). If the machine is in a
smokers home then you may have to clean the optos with lens cleaner for
cameras.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."


Well I resolved the problem for anyone else that runs into this problem. I had to replace diode r208 on the Powerboard. Once I did that the juke looks and sounds amazing!
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Error Coin Experts - Question About Error Coin dmzcompute Coins 17 September 17th 05 06:23 PM
FA:2003 *ERROR* SILVER PROOF SET-ERROR ON COA, + Fading 3 MS Coins 0 June 11th 05 12:57 AM
Wisconsin error error Xray Coins 5 February 12th 05 10:23 PM
error [email protected] Autographs 0 February 13th 04 01:02 AM
Error on new $20 whohah Paper Money 2 November 7th 03 09:40 PM


All times are GMT +1. The time now is 08:22 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 CollectingBanter.
The comments are property of their posters.