If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Rock-ola 484 stops playing during record play
Hi to all of you!
I have a problem with my Rock-ola 484 juke box that I have restored last Christmas. Untill yesterday it played ok. Today I have switch it on and i have played a record. All right! When I have played the second record the 484 stops itself after 5 seconds of playing. On the power distribution assembly (52405A), the “play relè” discharge itself and the “32 VDC led” switches off. The “overload mechanism light” is still off. If i push the “Circuit Breakers mechanism red button” the 484 continues to play the record for another 5 seconds and then it stops again, on the power distribution assembly (52405A), the “play relè” discharge itself and the “32 VDC led” switches off, and the “overload mechanism light” is still off. I tried to remove the neon lights but it's still the same Please can you help me? What can be? Thanks in advance Paolo |
Ads |
#2
|
|||
|
|||
Rock-ola 484 stops playing during record play
On 2019/12/17 1:40 a.m., Paolone wrote:
Hi to all of you! I have a problem with my Rock-ola 484 juke box that I have restored last Christmas. Untill yesterday it played ok. Today I have switch it on and i have played a record. All right! When I have played the second record the 484 stops itself after 5 seconds of playing. On the power distribution assembly (52405A), the “play relè” discharge itself and the “32 VDC led” switches off. The “overload mechanism light” is still off. If i push the “Circuit Breakers mechanism red button” the 484 continues to play the record for another 5 seconds and then it stops again, on the power distribution assembly (52405A), the “play relè” discharge itself and the “32 VDC led” switches off, and the “overload mechanism light” is still off. I tried to remove the neon lights but it's still the same Please can you help me? What can be? Thanks in advance Paolo Hi Paolo, Check to see if the gripper motor is seized. Can you turn the knurled knob at the bottom easily? If should turn in both directions - in one direction it will only turn a few revolutions before it stops (jams), turning in the other direction will start the picking up of the record process... I expect that the motor won't turn in either direction as the gears have jammed. If you can't free it with your fingers then loossen the motor mounting bolts and let it slide down enough to release the jam. Put the motor back and tighten the securing bolts once the jam is cleared up. I suspect that the microswitch controlling the gripper motor on the cam switch assembly is not working correctly and thus the gripper motor remains energized when the record is placed on the turntable. A simple test is to remove one wire to the gripper motor and then reset the circuit breaker. If the record now plays to the end without popping the breaker then check the gripper motor control switches. Good luck! John :-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#3
|
|||
|
|||
Rock-ola 484 stops playing during record play
Thanks John,
the gripper motor and the magazine motor are ok because i have cleaned and greased them last year when i restore my 484. I have turn easily right and left on both the motors. i supect as you the microswitch, because if i remove the connection of the gripper motor when the record start to play it continue to play normally. (in one try i forget to remove it and the 484 stops, so i remove the connection and i push the red circuit breaker button and the recond continue to play normally). But at the end of the disk the gripper arm don't pick up the disk anymore even if i insert the connection of the gripper motor. So (after i have insert the gripper motor connection) i have to use the scan switch (slow down to cancel position and then up to oprate position) to let the gripper arm put the record in the magazine. Wich microswitch is broken and do i have to check? Thanks Paolo |
#4
|
|||
|
|||
Rock-ola 484 stops playing during record play
On 2019/12/17 10:35 a.m., Paolone wrote:
Thanks John, the gripper motor and the magazine motor are ok because i have cleaned and greased them last year when i restore my 484. I have turn easily right and left on both the motors. i supect as you the microswitch, because if i remove the connection of the gripper motor when the record start to play it continue to play normally. (in one try i forget to remove it and the 484 stops, so i remove the connection and i push the red circuit breaker button and the recond continue to play normally). But at the end of the disk the gripper arm don't pick up the disk anymore even if i insert the connection of the gripper motor. So (after i have insert the gripper motor connection) i have to use the scan switch (slow down to cancel position and then up to oprate position) to let the gripper arm put the record in the magazine. Wich microswitch is broken and do i have to check? Thanks Paolo Hi Paolo, I recommend getting a copy of the Rockola service manual for the 484, they go into great detail in the troubleshooting guide on how each function works including the microswitches. At this time I am too busy to dig out a manual and give you further advice, my apologies! The best service manual reprints are from Victoryglass.com in the USA. Copies found elsewhere (except us, but we don't have that manual available at this time) may be unclear or blurred out due to bad copying or bad printing. John :-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#5
|
|||
|
|||
Rock-ola 484 stops playing during record play
Hi John
I have the Rockola 484 Service manual. And in the Sequence n. 16 says something on the microswitch n. 3 and the transistor Q301 e Q302 and the rele K301. I have cleaned and tested all 4 microswitches, but the problem remain Can you tell me some tip please? Paolo |
#6
|
|||
|
|||
Rock-ola 484 stops playing during record play
salut
J'ai changé le Q301 et le Q303, le relè K301, j'ai dessoudé le Q302 et ça va, mais le moteur de la pince est toujours connecté au + 32vdc lors de la lecture de l'enregistrement, et cela cause le problème avec le circuit du mécanisme. Quel autre composant arrête le moteur de la pince lors de la lecture du disque? Merci Paolo ——— Hi I have change the Q301 e Q303, the relè K301, i have desoldered the Q302 and is ok, but the gripper motor are still connected to the +32vdc when the record play, and this cause the problem with the mechanism circuit. Which other component stop the gripper motor when the record plays? Thanks PaoloIl |
#7
|
|||
|
|||
Rock-ola 484 stops playing during record play
Hi
I have change the Q301 e Q303, the relè K301, i have desoldered the Q302 and is ok, but the gripper motor are still connected to the +32vdc when the record play, and this cause the problem with the mechanism circuit. Which other component stop the gripper motor when the record plays? Thanks Paolo |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rock ola 490-2 wont play record | billb | Juke Boxes | 0 | May 28th 13 03:25 AM |
SEEBURG L Stops Playing In Middle of Record | Kim | Juke Boxes | 2 | September 27th 06 02:43 AM |
2600 record stops | paw | Juke Boxes | 6 | September 13th 06 01:51 PM |
2600 record stops | paw | Juke Boxes | 0 | September 11th 06 05:08 PM |
AMI F80 record selection playing indicator | jukeboxdenny | Juke Boxes | 0 | May 6th 06 03:31 PM |