If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
broken stepper Seeburg V200
Hi guys,
I have a problem with the stepper of the V200. If I make a selection on the juke box, the carriage scans and plays the record. But if I make a selection on the wallbox, I can hear the stepper clicking but the carriage does not run. If I make an other selection on the juke box, the carriage scans and plays the record (not the one from the wall box). Please help! Martin from Holland |
Ads |
#2
|
|||
|
|||
Your stepper needs to be cleaned and set up according to the manual.
At the moment it doesn't work at all...you might try exchanging the 2050 tubes to see if the jukebox still plays selections, if the jukebox stops selecting then the stepper 2050 would have been bad. John :-#)# On Mon, 3 Nov 2003 22:52:54 +0100, "burning juke" wrote: Hi guys, I have a problem with the stepper of the V200. If I make a selection on the juke box, the carriage scans and plays the record. But if I make a selection on the wallbox, I can hear the stepper clicking but the carriage does not run. If I make an other selection on the juke box, the carriage scans and plays the record (not the one from the wall box). Please help! Martin from Holland (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#3
|
|||
|
|||
Thanks John, bud I already check the tubes and cleaned the contacts. If I
make a selection the letter and number step relays are working fine bud there is no selection made. I used the stepper for over two years without a singe problem, but last week it stopped working. Martin "John Robertson" schreef in bericht ... Your stepper needs to be cleaned and set up according to the manual. At the moment it doesn't work at all...you might try exchanging the 2050 tubes to see if the jukebox still plays selections, if the jukebox stops selecting then the stepper 2050 would have been bad. John :-#)# On Mon, 3 Nov 2003 22:52:54 +0100, "burning juke" wrote: Hi guys, I have a problem with the stepper of the V200. If I make a selection on the juke box, the carriage scans and plays the record. But if I make a selection on the wallbox, I can hear the stepper clicking but the carriage does not run. If I make an other selection on the juke box, the carriage scans and plays the record (not the one from the wall box). Please help! Martin from Holland (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#4
|
|||
|
|||
Useful information...the problem then is in the write cycle for the
stepper. If the contact wiper(s) are not making contact then you would get a similar result. Likewise a problem with the write relay (no manual in front of me though)...the process requires that both step up units are latched, then the pulse is sent through the contacts and off to the tormat. If it is not writing then the problem is somewhere in that area. I would be checking contacts with an ohm meter to make sure they are electrically closed when they look closed... John :-#)# On Tue, 4 Nov 2003 18:14:05 +0100, "burning juke" wrote: Thanks John, bud I already check the tubes and cleaned the contacts. If I make a selection the letter and number step relays are working fine bud there is no selection made. I used the stepper for over two years without a singe problem, but last week it stopped working. Martin "John Robertson" schreef in bericht .. . Your stepper needs to be cleaned and set up according to the manual. At the moment it doesn't work at all...you might try exchanging the 2050 tubes to see if the jukebox still plays selections, if the jukebox stops selecting then the stepper 2050 would have been bad. John :-#)# On Mon, 3 Nov 2003 22:52:54 +0100, "burning juke" wrote: Hi guys, I have a problem with the stepper of the V200. If I make a selection on the juke box, the carriage scans and plays the record. But if I make a selection on the wallbox, I can hear the stepper clicking but the carriage does not run. If I make an other selection on the juke box, the carriage scans and plays the record (not the one from the wall box). Please help! Martin from Holland (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#5
|
|||
|
|||
John, broken coil of the timing relay 2. All contacts checked and adjusted.
Jukebox working fine again! Thanks, Martin "John Robertson" schreef in bericht ... Useful information...the problem then is in the write cycle for the stepper. If the contact wiper(s) are not making contact then you would get a similar result. Likewise a problem with the write relay (no manual in front of me though)...the process requires that both step up units are latched, then the pulse is sent through the contacts and off to the tormat. If it is not writing then the problem is somewhere in that area. I would be checking contacts with an ohm meter to make sure they are electrically closed when they look closed... John :-#)# On Tue, 4 Nov 2003 18:14:05 +0100, "burning juke" wrote: Thanks John, bud I already check the tubes and cleaned the contacts. If I make a selection the letter and number step relays are working fine bud there is no selection made. I used the stepper for over two years without a singe problem, but last week it stopped working. Martin "John Robertson" schreef in bericht .. . Your stepper needs to be cleaned and set up according to the manual. At the moment it doesn't work at all...you might try exchanging the 2050 tubes to see if the jukebox still plays selections, if the jukebox stops selecting then the stepper 2050 would have been bad. John :-#)# On Mon, 3 Nov 2003 22:52:54 +0100, "burning juke" wrote: Hi guys, I have a problem with the stepper of the V200. If I make a selection on the juke box, the carriage scans and plays the record. But if I make a selection on the wallbox, I can hear the stepper clicking but the carriage does not run. If I make an other selection on the juke box, the carriage scans and plays the record (not the one from the wall box). Please help! Martin from Holland (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." (Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wurlitzer and Seeburg domain take over | stuorto | Juke Boxes | 1 | September 13th 03 06:57 PM |
more Seeburg 100 Questions | Bernie | Juke Boxes | 0 | August 14th 03 02:55 AM |
V200 3WA wallbox hookup mystery | Randy P. | Juke Boxes | 1 | August 8th 03 11:48 PM |
Seeburg Mechs Needed! | Arthur Dent | Juke Boxes | 0 | August 5th 03 05:30 PM |
Record Handling; Seeburg vs. Rockola, how about AMI or Wurlitzers? | KLR | Juke Boxes | 5 | July 1st 03 04:19 PM |