If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
NSM Satellite
Greetings. I just picked up a NSM Satellite. Powers up but I cannot get it to play. It isn’t showing any errors but it doesn’t seem to go into service mode or allow me to press any keys. Also the lights around the outside will not turn in. I did notice that led 203 isn’t lit up like the rest of them. Any ideas?
|
Ads |
#3
|
|||
|
|||
NSM Satellite
Thanks John. All of the fuses are good and none are blowing. I am guessing the problem lies somewhere on the board because led203 is not lit. The other 4 leds are lit. I wish I could post a pic.
|
#4
|
|||
|
|||
NSM Satellite
On 2018/09/01 5:51 PM, wrote:
Thanks John. All of the fuses are good and none are blowing. I am guessing the problem lies somewhere on the board because led203 is not lit. The other 4 leds are lit. I wish I could post a pic. I don't have a manual handy (I am not at my shop) however if this LED is on the power regulator board then I still suspect you have a bad fuse. You do realize that you have to lift one end of each fuse when testing to be sure you are not reading other parts of the circuit as the fuse... John :-#)# -- (Please post followups or tech inquiries to the USENET newsgroup) John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 (604)872-5757 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out." |
#5
|
|||
|
|||
NSM Satellite
I will go through and retest all of the fuses again. Hopefully I just missed something! I will report back after I do it. I appreciate the help!
|
#6
|
|||
|
|||
NSM Satellite
I finally got some time to work on it and You were right! It was a fuse. However now I am receieving error code 00. I found the eslll manual online but I do not see any error codes I them. Any idea what error code 00 is?
|
#7
|
|||
|
|||
NSM Satellite
On Friday, September 14, 2018 at 7:36:59 PM UTC-4, wrote:
I finally got some time to work on it and You were right! It was a fuse. However now I am receieving error code 00. I found the eslll manual online but I do not see any error codes I them. Any idea what error code 00 is? Are you sure that's an error code, or just 00 for the credits ? Anyway, call George @ NSM Vinyl repair in Memphis, he's helped me out numerous times. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NSM Satellite 200 | fubarcoin | Juke Boxes | 2 | January 20th 11 11:05 AM |
NSM Satellite 200 | [email protected] | Juke Boxes | 1 | April 2nd 09 01:29 PM |
Satellite 200 help | vrundquist | Juke Boxes | 0 | January 5th 06 03:18 PM |
FS: NSM Satellite | Merlin Amusements | Juke Boxes | 0 | November 16th 05 01:34 PM |
NSM Satellite 200 | Ian Bullock | Juke Boxes | 1 | October 2nd 04 03:19 AM |