If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Advice
Hello,
I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave |
Ads |
#2
|
|||
|
|||
Advice
On Jul 7, 7:14*am, wrote:
Hello, I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave Well, couple of ?s back at you....... Do you want mono, hifi or stereo - depending on what type of 45s you have a preference for..... How much space do you have to manuver with going down that flight of stairs and around that 180 turn? If you haven't already, you might try these two sights: www.tomszone.com - This site is good for dimensions and weights on the jukeboxes www.pinballrebel.com - You have probably been here, but this is a great reference site for pictures of jukeboxes and maybe this would help narrow it down some, but it would seem the staircase might be an issue that needs some attention. |
#3
|
|||
|
|||
Advice
On Jul 7, 12:07*pm, pennyarcadecollector
wrote: On Jul 7, 7:14*am, wrote: Hello, I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave Well, couple of ?s back at you....... Do you want mono, hifi or stereo - depending on what type of 45s you have a preference for..... How much space do you have to manuver with going down that flight of stairs and around that 180 turn? If you haven't already, you might try these two sights:www.tomszone.com* *- * This site is good for dimensions and weights on the jukeboxeswww.pinballrebel.com* *- * You have probably been here, but this is a great reference site for pictures of jukeboxes and maybe this would help narrow it down some, but it would seem the staircase might be an issue that needs some attention.- Hide quoted text - - Show quoted text - Thanks for the speedy reply. I hadn't had my coffee when I first posted - duh. It's only a 90 degree turn and the landing is 38x38. I will measure to see what will fit. I know the cabs that are more vertical will do fine but the horizontal ones might be a squeeze. I'll make up a cardboard simulator to see what fits. |
#4
|
|||
|
|||
Advice
On Jul 7, 12:07*pm, pennyarcadecollector
wrote: On Jul 7, 7:14*am, wrote: Hello, I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave Well, couple of ?s back at you....... Do you want mono, hifi or stereo - depending on what type of 45s you have a preference for..... How much space do you have to manuver with going down that flight of stairs and around that 180 turn? If you haven't already, you might try these two sights:www.tomszone.com* *- * This site is good for dimensions and weights on the jukeboxeswww.pinballrebel.com* *- * You have probably been here, but this is a great reference site for pictures of jukeboxes and maybe this would help narrow it down some, but it would seem the staircase might be an issue that needs some attention.- Hide quoted text - - Show quoted text - It looks like anything that is 40W by 38D or smaller will be fine. Looks to me from tomszone that most jukes fall into this size range. |
#5
|
|||
|
|||
Advice
On Jul 7, 1:48*pm, wrote:
On Jul 7, 12:07*pm, pennyarcadecollector wrote: On Jul 7, 7:14*am, wrote: Hello, I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave Well, couple of ?s back at you....... Do you want mono, hifi or stereo - depending on what type of 45s you have a preference for..... How much space do you have to manuver with going down that flight of stairs and around that 180 turn? If you haven't already, you might try these two sights:www.tomszone.com**- * This site is good for dimensions and weights on the jukeboxeswww.pinballrebel.com**- * You have probably been here, but this is a great reference site for pictures of jukeboxes and maybe this would help narrow it down some, but it would seem the staircase might be an issue that needs some attention.- Hide quoted text - - Show quoted text - Thanks for the speedy reply. I hadn't had my coffee when I first posted - duh. It's only a 90 degree turn and the landing is 38x38. I will measure to see what will fit. I know the cabs that are more vertical will do fine but the horizontal ones might be a squeeze. I'll make up a cardboard simulator to see what fits.- Hide quoted text - - Show quoted text - Obviously still not enough coffee. I don't care whether it's mono, HiFi or stereo. |
#6
|
|||
|
|||
Advice
An AMI F or G 120 has a pretty small footprint. Mech is simple and reliable
once it's overhauled. Sound is fantastic. Price is reasonable. The cabinet is actually sort of a horn enclosure. You would need to upgrade the cartridge if you're playing stereo records. I don't own an AMI F or G but I'd like one. Ken D. wrote in message ... Hello, I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave |
#7
|
|||
|
|||
Advice
Ok, here's the BIG question!
How much are you willing to spend? The price difference between a Seeburg model "B", which is somewhat plain, and a Seeburg model "C", which is the jukebox usually called a "Happy Days" jukebox (although it NEVER appeared in the show) is quite significant. They have similar sound and mechs, but the "C" is MUCH flashier. If you tell us that you have a certain amount that you are willing to spend we can probably steer you better. Also, if you can let us know where you are located we might be able to hook you up with a juke close to you. "Ken Doyle" wrote in message ... An AMI F or G 120 has a pretty small footprint. Mech is simple and reliable once it's overhauled. Sound is fantastic. Price is reasonable. The cabinet is actually sort of a horn enclosure. You would need to upgrade the cartridge if you're playing stereo records. I don't own an AMI F or G but I'd like one. Ken D. wrote in message ... Hello, I'm a newbie to jukeboxes but a longtime EM pinball guy. I want to pick up a machine that plays 45's to restore for my home arcade and need advice from experts on what maker and model would be a good direction. I also understand vacuum tubes (I'm 50 and helped my Dad repair our TV's when I was a kid). I'd like a machine anywhere from the 50's to 70's that is not overly complicated to repair and is reliable once I'm done with it. Also wouldn't mind being able to see the records playing but not a requirement. I guess it would be nice too if parts were readily available and not overly expensive. Oh, and it would be good if it could go down some basement stairs that make a 180 degree turn. I realize I've just thrown out a really broad range and I'm even laughing at myself for what I've put down. So feel free to laugh at me too. Definitely shows my lack of education on jukeboxes. Anyway, any advice would be greatly appreciated. Thanks, Dave |
#8
|
|||
|
|||
Advice
For ease of repair and not complicated go with a mid 50`s Seeburg . I
like the looks of the Seeburg G best myself . Other models real close to that one have basicaly the same insides such as the C model . They consist of a record changer behind glass and 2 un-complicated electronic chassis mounted to the back door . The sound quality of these with the right cartridge is amazing I have found if you compleatly restore a jukebox before putting it into use it will go a long long time . The older ones sometimes like a little oil or contact cleaning at times . These older machines seem to hold better interest and value . I have worked on a bunch of 70`s through mid 80`s jukeboxes . You never know what one of these sounds like till you hear it . I had a pretty nice smaller mid 80`s Rockola that said ``supersound`` in HUGE letters on the front of it . Had big huge speakers too .. sounded like crap ! |
#9
|
|||
|
|||
Advice
On Jul 7, 8:20*pm, "Keith Stelter"
wrote: Ok, here's the BIG question! How much are you willing to spend? The price difference between a Seeburg model "B", which is somewhat plain, and a Seeburg model "C", which is the jukebox usually called a "Happy Days" jukebox (although it NEVER appeared in the show) is quite significant. They have similar sound and mechs, but the "C" is MUCH flashier. If you tell us that you have a certain amount that you are willing to spend we can probably steer you better. Also, if you can let us know where you are located we might be able to hook you up with a juke close to you. "Ken Doyle" wrote in message Ken, Since I'm going to do the sweat equity thing myself I was hoping to get something for around $500 and I live in Indy. I usually take in old pinballs that are in pretty sad shape and bring them back to life. I really enjoy the restoration process so I would like to do the same with a jukebox. But I also don't need to get into a machine that willl cost me more in parts that what it's worth. I would also maybe like to get one that I could hook up a remote selector box to. I know I am showing my newbieness to the hobby but am most grateful for the feedback given so far. Dave |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for advice | randiR | Paper Money | 0 | December 15th 07 09:07 PM |
Advice please | [email protected] | Dolls | 0 | April 26th 07 02:08 AM |
hello, i need some advice | Nick | Card discussions | 0 | November 13th 05 06:30 AM |
I need some advice. | Bob | Autographs | 11 | August 23rd 05 02:37 AM |
Looking for Advice ... | Texan in NY | Coins | 1 | April 30th 04 10:40 PM |