View Single Post
  #4  
Old May 17th 10, 02:00 AM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
 
Posts: 901
Default Write in problem: Seeburg L-100

Grojohn wrote:
Im wondering if a weak OA2 tube could cause my write in problem. One
of them does not glow very bright. I do not have a read problem as the
battery test works...

John


Well, a voltmeter check across the 0A2 should settle if it is good or
not. Should be 150VDC across each.

If OK, then check the 36 ohm write-in series resistor - I've replaced
lots of those over the years. It is located near the test strip - shows
up in the schematics - it opens up...

John :-#)#

--
(Please post followups or tech inquiries to the newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
Ads