View Single Post
  #6  
Old April 10th 18, 01:00 AM posted to alt.collecting.juke-boxes
[email protected]
external usenet poster
 
Posts: 7
Default TECH: Bad transformer on my Seeburg 100J WSR7-L5 needreplacement or compatible

On Saturday, April 7, 2018 at 11:45:15 AM UTC-5, wrote:
Hi All,

My question is this: Since I am not going to be using a wall box, I do not need all the outputs of the transformer. What outputs do I need to just have the jukebox select only?

John


John, if a "new" tran is not available, separate transformers can be used: https://www.flickr.com/photos/90641375@N06/40457888865/

Subs for dead WSR main tran going left to right:

Red line: 150vac -only needed for wallbox stepper.

Next two Green lines for 25 vac and 30vdc. Use two 24v trans @ 4amps. If no stepper tube is used it is permissible to simply use one 24v tran for both the AC and DC.

Yellow is the 5.x vac for decorative lights. A 5 volt charger w/i1 amp output will suffice here. A standard 6 volt 1 amp tran can be used but lights will burn out more often.

Last green is the 6.3 # 4 amp for the tube heaters.

RobNYC
Ads