em pinball wrote:
i am working on a model -40 ami jukebox. It was sold to me as a 45rpm
but it looks just like my 78 rpm i have. the wire from the tone arm to
the amp is broken. it has a two hole plug where it plugs into the amp.
i have another d-40 but it only has a one hole plug. can someone tell
me the difference. i also need the shaft that goes through the
transfer mechanism. its the shaft assembly the tone arm sits on and
moves the tone arm when transferring also need the tone arm wiring to
the amp but itmust be a two hole plug. thanks for reading.

I have a D-40-78 hideaway that I am scrapping - if you don't find the
parts email me and I'll get to it in the next month or so (it's in deep
storage).

The tone arm socket was used on some early amps.The fat pin is
shield/ground and the thin is signal. I believe I have one or two of
those left as well.

John :-#)#

--
(Please post followups or tech inquiries to the newsgroup)
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."