View Single Post
  #13  
Old May 30th 10, 08:44 PM posted to alt.collecting.juke-boxes
Grojohn
external usenet poster
 
Posts: 19
Default Write in problem: Seeburg L-100

Ok,

Just discovered something else. If I take the write-in line to a 18k
resistor then ground and manually engage the subtract solenoid, I get
10 vdc across the resistor. Again, if the circuit is open and engage
the subtract solenoid, I get 19 vdc.

Ok, so I hooked up another meter in series with that 18k resistor to
monitor the current draw. I get 10 vdc but only .5 mA. I dont think I
have enough current to preform the write in.

John
Ads