Thread
:
Seeburg selectomatic 100r
View Single Post
#
2
April 24th 18, 01:34 AM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
Posts: 901
Seeburg selectomatic 100r
On 2018/04/23 3:40 PM,
wrote:
I have a 54 seeburg selectomatic 100 and I can't figure it out. It scanned but wouldn't play. The internet suggested I clean the clutches so I did. Now that i put it back together the arm that controls the clutches(and seems to lock the cam?) Wont drop far enough for it to drop into scan mode. Any ideas? I know nothing about these machines
I suggest you either get a good copy of the original operators manual
(available from VictoryGlass.com) or find someon in your are who fixes
these machines.
If you get the manual, then start at the first adjustment and work you
way through to the last - each adjustment affects the next, or it is in
the factory setup sequence. Doing any of them out of order will only
screw up the works. The factory manual also comes with a good
troubleshooting guide which may be of help if you are technically able.
if looking for repair help the web site
http://www.alwaysjukin.com
keeps
a list of service people as do I on
https://www.flippers.com/jukebox_service.html
Hope that helps. It is hopeless, without the manual, if you have no
experience on these machines.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
John Robertson
View Public Profile
View message headers
Find all posts by John Robertson
Find all threads started by John Robertson
Ads