I bought this box used, like most of us. There is a strip of screws on
the right side of the cabinet. Would this be the terminal strip your
suggesting? I can email you a pic privately, if that would help.
Thanks,
Rob
"Don Lanway" wrote in
news:SDGrb.159405$e01.571035@attbi_s02:
If you don't have the kit installed, with the terminal strip for
external speakers, look for the crossover boards. They have extra
spade terminals to feed the amp output.
As I recall, the internal speakers are a four ohm load, but I won't
swear to it..
If I remember right, it's designed to handle two sets of eight ohm
external speakers in parallel. You end up with a two ohm load on the
amp, which strangely enough, it's designed for. They originally used
L-pads for balancing sound levels.
Don
Oregon Jukebox
"Rob Rosenhouse" wrote in message
. 136...
I have a Seeburg SCD-1, and I would like to add a second set of
speakers. Does anyone know where to wire them to? Anything else I
should know
before
doing this?
Thanks,
Rob
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.537 / Virus Database: 332 - Release Date: 11/6/03