Thread
:
M100C mechanism end glass replacement
View Single Post
#
2
June 22nd 17, 05:46 PM posted to alt.collecting.juke-boxes
John Robertson
external usenet poster
Posts: 901
M100C mechanism end glass replacement
On 2017/06/22 9:31 AM,
wrote:
Anybody offer tips on how I might remove the stubborn seamless piece of glass that is in one of the mechanism end panels?......I intend to replace it with the correct rectangular (1x1/2) pattern glass.....The side trim metal piece has already been removed but the glass piece which is not glued onto the masonite does not want to budge....Am afraid I will distort the metal frame if I start to wedge screwdrivers in around the frame...
Try heating the junction area carefully with a hot air gun or hair
dryer. Use the low setting - you don't want the glass to break from heat
stress!
John :-#)#
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
--
John Robertson
View Public Profile
View message headers
Find all posts by John Robertson
Find all threads started by John Robertson
Ads