CollectingBanter

CollectingBanter (http://www.collectingbanter.com/index.php)
-   Juke Boxes (http://www.collectingbanter.com/forumdisplay.php?f=21)
-   -   M100C mechanism end glass replacement (http://www.collectingbanter.com/showthread.php?t=323954)

[email protected] June 22nd 17 05:31 PM

M100C mechanism end glass replacement
 
Anybody offer tips on how I might remove the stubborn seamless piece of glass that is in one of the mechanism end panels?......I intend to replace it with the correct rectangular (1x1/2) pattern glass.....The side trim metal piece has already been removed but the glass piece which is not glued onto the masonite does not want to budge....Am afraid I will distort the metal frame if I start to wedge screwdrivers in around the frame...

John Robertson June 22nd 17 05:46 PM

M100C mechanism end glass replacement
 
On 2017/06/22 9:31 AM, wrote:
Anybody offer tips on how I might remove the stubborn seamless piece of glass that is in one of the mechanism end panels?......I intend to replace it with the correct rectangular (1x1/2) pattern glass.....The side trim metal piece has already been removed but the glass piece which is not glued onto the masonite does not want to budge....Am afraid I will distort the metal frame if I start to wedge screwdrivers in around the frame...


Try heating the junction area carefully with a hot air gun or hair
dryer. Use the low setting - you don't want the glass to break from heat
stress!

John :-#)#

(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

--


All times are GMT +1. The time now is 05:38 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CollectingBanter.com